INTEGRA II Insert - Rika
INTEGRA II Insert - Rika
INTEGRA II Insert - Rika
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3. AUTOMATIC SAFETY FUNCTION<br />
POWER FAILURE<br />
After a short power failure the operating functions<br />
that were set before the power failure are continued.<br />
ON mode (manual operation). The control switches<br />
to the ST (Start Phase) and the unit then re-runs in<br />
ON operation.<br />
TM mode (automatic operation). The control<br />
switches to the ST (Start Phase) and the unit then<br />
re-runs in TM operation.<br />
SB mode (operational readiness, standby<br />
operation). After two seconds the control re-runs in<br />
the SB operation.<br />
On power failure a small amount of smoke may be<br />
emitted. This does not last for more than three to<br />
five minutes and does not represent a safety risks.<br />
OVERHEATING<br />
A temperature safety switch (STL) switches the<br />
stove off automatically if it overheats.<br />
A taking-out-of-service program (cleaning, follow-up<br />
phase) is performed. The stove must be restarted<br />
depending on the pre-set mode.<br />
CAUTION: If overheating has occurred then<br />
maintenance or cleaning work must be carried out.<br />
LOW TEMPERATURE SWITCH OFF<br />
If the stove cools down below a minimum<br />
temperature, then the stove will switch off. This<br />
switch off can also occur if pre-heating is too slow.<br />
- 11 -<br />
E N G L I S H