INTEGRA II Insert - Rika

E N G L I S H
Ensure that when the stove is in ON mode the heating
operation starts after 10 seconds. In automatic mode
(TM) the heating process starts in accordance with the
programmed heating times.
MAIN MENU – OPERATING
RANGES
According to your requirements you can choose one
of the following three operating types:
● Standby mode
● Manual operation
● Automatic operation
“SB” = Standby Stove is switched
off but remains active for control by
Tele-Control (Telephone).
“ON” = Manual operation The
number equals the heating output
in percent (0% is minimum output
and 100% is maximum heating
output).
“TM” = Automatic operation(Time
mode) The number equals the
heating output in percent (0% is
minimum output and 100% is
maximum heating output.
You can switch between the various operating types
by pressing “ENTER”
- 20 -
Start manual operation.
The following flashing indicators appear alternately
on the display
“ST” indicates start
The number below indicates the remaining time for
the start process in minutes.
On completion of the start phase the following
appears continuously on the display
“ON” = Manual operation
If you want to change the current heating output
then you can set the required heating output in 5%
steps (from 0 to 100) by pressing the “+” or “-” keys.