Chapter 12 - Zodiac

BERINGER AERONAL FLOATING DISCS
Beringer discs use a gray cast iron outer band as this material is
universally known to provide the best braking performance for roadas
well as racing use.The surface of the cast iron outer band is covered
with special aluminum plasma to prevent the disc from corrosion and
to allow the usage of any sintered metal pad.This very fine grain surface
increases braking power up to 40% and is subject to very little wear
to extend lifetime. Beringer's "Aeronal" discs are designed for High
Performance applications. They feature narrow cast-iron outer bands
and CNC machined carriers machined from aeronautic aluminum. In
combination with as little as 6 studs instead of the 12 used in Beringer's
Classic style discs; this reduces the gyroscopic effect to increase the
maneuverability of the bike. Discs are available with the carriers in
chrome, polished or black anodized. It is strongly recommended to use
these discs with sintered brake pads or, for ultimate braking
performance, with Beringer calipers.
Fits front and rear on all 1984 thru 1999 models,
except rear on FLH/FLT series models 1986 thru
1999
Rotor has 11 1/2" outer diameter, 2" inner diameter and
3/8" counter bore mounting holes with reduction sleeves
for use with 5/16" bolts
Left Right
701482 701483 Polished
701484 701485 Black
Fits front and rear on all 2000 to present models,
except front on 2006 to present Dyna models
Rotor has 11 1/2" outer diameter, 2.22" inner diameter
and 3/8" counter bore mounting holes with reduction
sleeves for use with 5/16" bolts
Left Right
701486 701487 Polished
701488 701489 Black
701490 701491 Chrome
Disc Brake Rotors
BERINGER CLASSIC FLOATING DISCS
Besides their high-end brake calipers Beringer also manufactures a
range of high performance cast iron floating brake discs. These use a
gray cast iron brake surface, a material universally used by
manufacturers of high performance discs. However, Beringer has
developed a chemical composition, casting process and heat treatment
to provide the discs with an exceptional performance quality. The
specific cast iron structure allows a faster dissipation of the heat
compared to any cast iron or stainless steel discs, while accepting far
higher temperature than any other material. Furthermore, the use of
this material allows narrow outer bands, thus saves up to 20% weight.
The surface of the cast iron outer band is covered with special aluminum
plasma to prevent the disc from corrosion and to allow the usage of
any sintered metal pad. This very fine grain surface increases braking
power up to 40% and is subject to very little wear to extend the lifetime.
Classic discs feature perforated cast iron outer bands with a CNC
machined aluminum carrier, which is attached to the outer band with
12 steel low-friction studs. Carriers are available in chrome, polished
or black anodized. Discs provide excellent braking with either organic
or sintered pads.
Fits front and rear on all 1984 thru 1999 models,
except rear on FLH/FLT series models 1986-1999.
Rotor has 11 1/2" outer diameter, 2" inner diameter and 3/8"
counter bore mounting holes with reduction sleeves for use
with 5/16" bolts.
701476 Polished
701477 Black
701478 Chrome
Fits front and rear on all 2000 to present models,
except front on 2006 to present Dyna models.
Rotor has 11 1/2" outer diameter, 2.22" inner diameter and
3/8" counter bore mounting holes with reduction sleeves for
use with 5/16" bolts.
701479 Polished
701480 Black
701481 Chrome
12
Brake Components & Brake Line
12-049