2012 Price List

2012 price list
düker Pillar Hydrant Type 494, design aUd
dN 80 and 100, PN 16, according to diN eN 1074-6
with additional shut-off
düker enamel finish for water
Connection flange according to DIN EN 1092-2, automatic drainage and protection against
backflow and pressurised water, security lock of the internal mountings, traffic-area version
with installation-friendly pre-determined breaking point, 2 B outlets, DN 100, optionally with
or without A outlet, all elastomers and plastic parts according to KTW recommendation and
DVGW W 270, DVGW tested and registered, CE approval according to DIN EN 14384.
Material
• Bottom, upper and lower part of the pillar EN-GJS-500-7 (JS 1050)
• Aluminum operating cap, outlets and outlet covers
• Massive obturator linkage, stem X20Cr13
• Stem nut, stem bearing, predetermined breaking coupling, bonnet nut special brass
• Brass seat ring, rubberized EPDM
• Obturator – entirely vulcanized (elastomer – EPDM)
Surface protection
• Inside: Düker enamel
• Outside: Bottom and lower part of the pillar – base coat enamel with epoxy resin cover coat
in RAL 3001 signal red. Upper part of the pillar – 2K-PU lacquer RAL 3001 signal red
Field of application: Drinking water up to 60 °C
Nominal
diameter DN
Item no. DN Pipe covering
m
558904
80
1.25
558905 2 upper outlets B 1.5
561000
100
1.25
561001 2 upper outlets B 1.5
558906
100
2 upper outlets B
1.25
558907 1 bottom outlet A 1.5
Upon request:
• inside and outside enamel
• height adjustable version
Nominal
pressure PN
Test pressure in bar
(water)
Body Seat
80 – 100 16 24 17.6
PN Price in €
16 2,096.00
2,200.80
16 2,525.70
2,620.00
16 2,525.70
– 40 –
2,620.00
Düker valves