Operating Instructions Part 1 VCB - Bonfiglioli USA
Operating Instructions Part 1 VCB - Bonfiglioli USA
Operating Instructions Part 1 VCB - Bonfiglioli USA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Drill pattern for feed-through model <strong>VCB</strong> 400-150 to -250<br />
P1 06/05 3-12<br />
504<br />
Diameter of the fixing holes 9 mm<br />
The feed-through depth of the heat sink is 110 mm (see dimensional drawing of the<br />
standard model). Two brackets are necessary for the installation into an electrical<br />
cabinet.<br />
Fitting the plate:<br />
1. Undo the fastening screws on the frequency inverter.<br />
2. Fasten the plate onto the top and bottom sides with the three screws.<br />
3. Push the frequency inverter with the heat sink through the opening.<br />
4. Fit the frequency inverter to the rear wall of the control cabinet<br />
400<br />
342
Change language