KEMPEROL® 1K-PUR Waterproofing - KEMPER SYSTEM

More documents

Recommendations

Info

purposes. We are liable only for our products being free from faults - correct application of our products therefore falls entirely within your scope of liability and responsibility. Our products are sold exclusively on the basis of our conditions of sale and delivery. Published: Vellmar, June 2008 ______________________________________________________________________________________________________________ KEMPER SYSTEM GmbH & Co. KG · Holländische Straße 32-36 · D-34246 Vellmar · Tel. +49-(0)561-82950 · Fax +49-(0)561-829510 www.kemper-system.com · post@kemper-system.com · Certified according to DIN EN ISO 9001:2000 and DIN EN ISO 14001
KEMPEROL ® 120 Fleece Uses � As reinforcement for KEMPEROL ® 1K-PUR Waterproofing System � When applied in a double layer, this fleece can also be used for other KEMPEROL ® Waterproofing Systems. � For new construction and remedial projects Features � system tested and adapted to the specific purpose � regulates the layer thickness � suitable to every shape of the surface CE-Marking Component to 3 ETA 03/0025 ETA 03/0026 ETA 03/0043 ETA 03/0044 Composition Special fleece based on polyester. Pack sizes Rolls Length in metres: 50 Width in cm: 105 / 70 / 52.5 / 26.25 Length in metres: 25 Width in cm: 26.25 Shelf Life Keep away from dampness, store dry, flat and creasefree. Properties Form solid Colour white Weight [g/m²] approx. 120 Application Approximately 2/3rd of the required KEMPEROL ® resin should be applied to the primed substrate prior to embedding the KEMPEROL ® 120 Fleece. All overlaps in the fleece should be saturated to ensure continuity of the system, and be a minimum of 50 mm. When this has changed colour by rolling or brushing from above, the remaining 1/3rd of resin is applied to the surface and lightly rolled to remove excess material. All overlaps in the fleece should be saturated to ensure continuity of the system, and be a minimum of 50 mm. The interface with door and window elements etc., minimum recommended height 15 cm, should have a minimum 5 cm overlap. Connections to the surface waterproofing should be made with a minimum 10 cm overlap. Disposal Fleece EWC 04 02 21 General information We guarantee the consistent high quality of our products. KEMPER SYSTEM products must not be mixed with other manufacturers´ products. The technical information and application instructions contained herein reflect the current level of knowledge and experience with our products. In each case, the new edition supersedes the previous technical
Page 1 and 2: KEMPEROL ® 1K-PUR Waterproofing Us
Page 3: KEMPERTEC ® 1K Thinner Uses � Fo
Page 7 and 8: KEMPEROL ® 200 Fleece Uses � As
Page 9 and 10: KEMPEROL ® RS Reinforcement Strip
Page 11 and 12: Priming Recommendation KEMPEROL 1K-
Page 13 and 14: Remove the bag from the aluminium p
Page 15 and 16: A. Packaging: 1,5 kg-sachet: Remove
Page 17 and 18: Cut off one corner of the bag and p
Page 19 and 20: occur. To avoid these separating ef
Page 21 and 22: humidity) and provided that the pri
Page 23 and 24: Personal protective equipment shoul
Page 25 and 26: General information We guarantee th
Page 27 and 28: Solvents containing KEMPERTEC ® ,
Page 29 and 30: With KEMPERTEC ® EP-Primer, the pr
Page 31 and 32: KEMPEROL ® waterproofing systems a
Page 33 and 34: 4. Cracks in the substrate On subst
Page 35 and 36: therefore falls entirely within you
Page 37 and 38: Product Estimated use Estimated tim
Page 39 and 40: Product Estimated use Estimated tim
Page 41 and 42: Substance solid Solution liquid UP

KEMPEROL® 1K-PUR Waterproofing - KEMPER SYSTEM

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?