10.07.2015 Views

helena - Agentúra Harmony vos

helena - Agentúra Harmony vos

helena - Agentúra Harmony vos

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ii) SAS-3 users:Step Time (mm:ss) Temperature (°C) Voltage OtherLoad Sample 00:30 21 Speed 1Apply Sample 00:30 21 Speed 1*Electrophoresis 17:00 21 100Apply antisera 10:00 21Insert Combs 02:00 21Blotter D 05:00 40Dry 08:00 54* Use Location 2NOTE: For Serum Screen, 1 sample application is required. For Urine Screen, 10 sampleapplications are required. Remove the gel blocks prior to drying.8. Following electrophoresis, (SAS-1 Plus users: remove the cover), remove the electrodes from thesurface of the gel. (SAS-3 users: remove the alignment guide). Position the antiserum applicationtemplate onto the gel surface. NOTE: The milled antisera channels should be aligned centrallyover the printed box on the gel in which the samples are applied.9. Apply 60µL of Pentavalent Antiserum into each hole of the antiserum application template. Ensurethat the antisera has completely filled the channels.10. Incubate the gel.11. Following incubation, place a blotter comb into the holes of the antiserum template. Allow 2minutes for the excess antisera to be absorbed, then remove the blotter combs and the templatefrom the gel surface.12. Place a blotter D (smooth side down) onto the surface of the gel, leave for 10 seconds and remove.13. Place a blotter D (smooth side down) onto the surface of the gel and replace the antiserumtemplate to hold the blotter flat. Blot the gel. NOTE: Immediately after use, clean the antiseratemplate with a mild biocidal detergent.14. Remove the blotter D. SAS-3 users: Dry the gel, and start initial 3 second chamber wash onSAS-4 unit.15. Remove the gel blocks and attach the gel to the staining chamber holder, and complete the finalsteps on the SAS-2 or SAS-4.16. At the end of the staining cycle, remove the gel from the staining chamber. The gel is now readyfor examination.a) SAS-2 (Auto-Stainer)Step Solution Time (mm:ss) Port Temp (°C)Dry —- 10:00 55Wash Wash solution 07:00 4Stain Acid Blue Stain 03:00 6Destain Destain solution 02:00 2Dry —- 05:00 65Wash Wash solution 03:00 4Wash Wash solution 03:00 4Dry —- 05:00 654

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!