Register and win! - Megaobrabiarki

OptionH1 Steam pressure ironH2 Upper steam buttonH3 Display - heater (ORANGE)H4 Lower steam buttonH5 Steam lockH6 Temperature controllerH7Steam plugQuick Reference Illustrations on Page 21 Fill the water reservoir up to the "MAX"marking.2 Insert the steam plug into the applianceconnector.3 Plug in the main plug.Switch on the appliance by turning theselector switch.4 Display - heater blinks green.Wait until the heater display lights uppermanently green.5 Connect the accessories to the steam gun.The steam cleaner is ready to use.Operation Illustrations on fold-outpage!Attaching the Accessories IllustrationOpen the cover of the appliance socket. Tightly insert the steam plug into the applianceconnector. The plug must clickinto place audibly.To disconnect: Press the cover of theappliance connector down and disconnectthe steam plug from the applianceconnector. Illustration -Connect the required accessories (seeChapter "How to use the accessories“)to the steam gun. Insert the open end ofthe accessory on the steam gun andpush onto the steam gun until the unlockingbutton of the steam gun locksinto place. IllustrationUse the extension tubes if necessary.To do so, connect one or both extensiontubes to the steam gun. Insert therequired accessories on the free end ofthe extension tube.Removing the Accessories DangerHot water may drip out of the accessoryparts while you are detaching them! Neverdetach accessory parts while steamstreams out - risk of scalding! Move the child protection unit towardthe back (steam lever locked). IllustrationTo detach the accessory parts, pressthe unlocking button and pull the itemsapart.Filling the Water ReservoirThe water reservoir may be refilled at anytime.CautionDo not use condensation water from thedrier!Do not fill with detergent or other additives(for example fragrances)!Do not use pure distilled water! Max. 50%distilled water and 50% tap water.Do not use collected rain water! IllustrationYou can remove the water reservoir to fill itor you can fill it directly on the appliance.Take off water reservoir Pull the water reservoir straight up. Fill the water reservoir up to the "MAX"marking while positioned vertically underthe water tap. Insert the water reservoir and pressdownwards until it arrests.Directly on the appliance Pour water from a container into thefunnel inlet. Fill up to the "MAX" marking.EN – 819