warning - Scag Power Equipment

481543Section 44.13 ADJUSTING CUTTING HEIGHTDECK RELEASELEVERThe mower deck can be adjusted from a height of 1-inchto 6 inches at 1/4-inch intervals. To adjust the cuttingheight:65.554.543.532.521.51CUTTINGHEIGHT1. Push the cutting height adjustment foot pedal all theway forward using your right foot until it locks inplace. (Figure 4-6).2. Insert the lanyard pin into the cutting height index atthe desired cutting height. Push forward on the decklift foot lever, hold in place and lift up on the deckrelease lever, (Figure 4-7). Slowly release the footpedal. A deck height decal is located on the cuttingheight index as an aid in adjusting the deck to thedesired height. (Figure 4-6).LANYARDPINFigure 4-7 Deck Release Lever4.14 Towing (optional hitch accessory)390S0151-1CUTTINGHEIGHT65.554.543.532.521.514815431. Never allow children or others in or on towedequipment.2. Tow only with a machine that has a hitch designed fortowing. Do not attach towed equipment except at thehitch point.3. Follow manufacturer's recommendations for weightlimit for towed equipment. 250/lbs. maximum towingweight.HEIGHT ADJUSTMENT PEDALFigure 4-6 Adjusting Cutting Height390S0140-24. Never tow on slopes. The weight of the towedequipment may cause loss of traction and loss ofcontrol.5. Travel slowly and allow extra distance to stop.6. Zero-turning with a trailer attached could causedamage to the trailer or mower.19