ENFRIADORA AIRE/AGUA EF COMPACTA - Ferromar

ENGLISH2. MODELSCOOLERMODELPOWER OUTPUT (KW)EF-4 5,53EF-6 8,30EF-8 11,59EF-10 15,44EF-12 17,35EF-15 31,02EF-17 29,753. GENERAL FEATURES3.1. DescriptionThe air-water cooler unit is used for the cooling of swimming pools, bathtubs, etc.3.2. Equipment descriptionThe air-water cooler unit is equipped with the following elements:• Robust and lightweight design with lacquered plate or aluminium – magnesia, with indoor oroutdoor areas possible placement.• High performance battery condenser manufactured in copper tubing and lacquered aluminiumfins, special for corrosive environments and shorelines.• Axial fan engine with direct coupling (Placing machine outdoors).• Centrifugal fan (Placing machine indoors).• Hermetically sealed compressor, including internal protection, positive temperature coefficientdevice and silencer.• Water evaporator (heat exchanger water-water).• High and low pressure switches, rearmament manual.• Expansion valve with pressure equaliser.• Dehydrating filter.• Hydraulic circuit with flow interrupter at water entrance, manufactured on PVC pipe with highmolecular weight, good elasticity and remarkable resistance to cracks under stress conditions,fundamental characteristic for the transport of liquids under pressure.• Filling refrigerant gas R-407-C.• Refrigerator circuit made of nitrogenized, dehydrated and deoxidized copper.3.3. Electrical panelElectrical control panel for complete process control and to guarantee optimum performance withminimum power consumption at all times. Electrical control panel consists on the following:• ON / OFF switch.• Compressor electronic relay.• Contactors and thermal relay.• Herat contactors.• Controller.© TALLERES DEL AGUA S.L. 2008. TODOS LOS DERECHOS RESERVADOS. DOCUMENTO CONFIDENCIAL Y EN PROPIEDAD.Page 29 of 50