1 - Hunter Fan

B20FB2121G•FInstall the wiring cover plate. Make sure allwiring connections are inside the box or underthe wiring cover plate.Tighten the wiring cover plate screw.B22B23HConnect 4” duct and vent to the outside. Tape joints.If ducting does not fit securely, an adapter may needto be purchased.Connect wiring from the motor to the wiring cover plate.B24B25HIReinstall the motor by inserting the tabs and pushing up intoposition. Make sure the wires are not pinchedbetween the motor and the housing.1041722-01 09/09/2011Secure the motor by tightening the 2 screws.