1 - Hunter Fan

More documents

Recommendations

Info

C12E9”9.75”DCut out an opening for the housing.Slide the mounting rails into brackets.C13C145/81/25/81/2Position the correct depth mark at the bottom edge of thejoist based on the thickness of your sheetrock.Mark position of screws by using holes as a template.C15C161/8" BitDrill a hole in the center of each outline.1241722-01 09/09/2011Insert screws, leaving space between the screw headand the joist. Screws are not provided.
C17C18Attach the rails onto the screws.Tighten screws.C19C20Connect 4” duct and vent to the outside. Tape joints.If ducting does not fit securely, an adapter mayneed to be purchased.Pull wires through the strain relief.C21Tighten the strain relief screws.1341722-01 09/09/2011
Page 1 and 2: EllipseBath Ventilator with Light a
Page 3 and 4: Check all the parts.If damaged, cal
Page 6 and 7: A13Pull wires through the strain re
Page 8 and 9: A23Go to stepE1on page 18to attach
Page 10 and 11: B20FB2121G•FInstall the wiring co
Page 14 and 15: C22GroundFan MotorNight LightLight2
Page 16 and 17: D13D1421Pull wires through strain r
Page 18 and 19: D23OND24Go to stepE1OFFon page 18to
Page 20 and 21: WarrantyHunter Fan CompanyBath Exha
Page 22 and 23: A D V E R T E N C I APARA REDUCIR E
Page 24 and 25: 34HERetire el motor/soplador del al
Page 26 and 27: A13Tienda los cables a través del
Page 28 and 29: A23Vaya al pasoE1en la página 38 p
Page 30 and 31: B20FB2121G•FInstale la placa de c
Page 32 and 33: C12E9”9.75”DRecorte una abertur
Page 34 and 35: C22Motor del ventiladorLuz denocheL
Page 36 and 37: D13D1421Tienda los cables a través
Page 38 and 39: D23ENCENDIDOAPAGADOD24Vaya al pasoE
Page 40: GarantíaHunter Fan CompanyExtracto

1 - Hunter Fan

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?