Microlino Quickguide

EN
END THE CHARGING PROCESS:
1. Unlock the vehicle (also unlocks the charging cable).
2. Unlocking of the charging cable can take up to 10 seconds.
3. Unplug the cable from the vehicle
4. Remove the cable from the AC wallbox or household socket.
PUBLIC CHARGING:
The public charging points can be found on the applications of
the charging card providers. Popular providers with access to all
major charging networks include:
Swisscharge
evpass
MOVE
ADDITIONAL INFORMATION:
At a cell temperature of -5°C, charging is not possible.
In this case, we recommend driving the vehicle briefly to
bring the cell temperature (not the same as the outside temperature)
to a level suitable for charging.
When charging at the household socket using an ICCB
charger (In-Cable Control Box or also “household charger”),
select a maximum current of 8 amps.
We strongly recommend that you never leave the vehicle
connected to the wallbox or the ICCB charger for
more than 48 hours and ideally only for the charging time
actually required. In rare cases if not done, it may occur that
the 12V battery discharges and the vehicle can no longer
be started.
08 DRIVING LIGHTS & HORN
The Microlino 2.0 is equipped with parking lights, daytime running
lights, low and high beams, brake lights and direction indicators.
The arrangement of the driving light switch is as follows:
Lowest position
Middle position
Top position
Side button
= Daytime running light
= Parking light
= Low beam / high beam
= Horn
ADDITIONAL INFORMATION:
The vehicle does not have a dusk sensor. This means that in the
automatic position, the low beam is NOT activated automatically
when it gets darker and must be switched on manually.
10 11