Microlino Quickguide
This is a Quickguide for the Microlino, everything you need to know.
This is a Quickguide for the Microlino, everything you need to know.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
EN<br />
10 IMPORTANT NOTES &<br />
TROUBLESHOOTING<br />
09 BATTERY OFF SWITCH<br />
If the vehicle is not in use for more than two weeks, the 12 V battery<br />
must be disconnected from the system using the battery-off switch.<br />
This prevents it from discharging during the standstill period.<br />
ADDITIONAL INFORMATION:<br />
If the battery off switch has been activated, the vehicle can<br />
no longer be unlocked via the radio remote control. When<br />
using the vehicle again, it must therefore be unlocked manually<br />
via the lock on the front door (apply light pressure to the front door<br />
when unlocking) and then the battery must be reactivated via the<br />
switch in the boot. The boot cannot be opened if the 12 V battery is<br />
switched off. The battery switch must be switched on from the front.<br />
IMPORTANT NOTES!<br />
VEHICLE IDENTIFICATION<br />
The vehicle identification number (VIN) is stamped into the chassis.<br />
Visible under the carpet in the passenger compartment (passenger<br />
side).<br />
TOWING HOOK<br />
The towing hook is located under the boot carpet. It is mounted on<br />
the front of the vehicle. For this, the cover in the front bumper must<br />
be removed.<br />
WHEELS AND TYRES<br />
• Recommended tyre pressure<br />
• Tightening torque wheels<br />
IMPORTANT!<br />
1.8 bar (front and rear)<br />
40 Nm<br />
The tightening torque of the wheels must be 40Nm and<br />
should not exceed this value. Otherwise, the rims may be<br />
damaged.<br />
SIDE WINDOW<br />
At temperatures below 0° Celsius, the side window guide may<br />
freeze. Please do not apply increased force, as otherwise damage<br />
to the closing device cannot be ruled out.<br />
TROUBLESHOOTING<br />
VEHICLE DOES NOT DRIVE<br />
Quick fix 1 Make sure that the door is completely closed (softclose).<br />
Quick fix 2 Remove the ignition key, wait approx. one minute<br />
and turn the ignition key back to the driving position.<br />
Quick fix 3 Turn the 12V switch to OFF, wait approx. five minutes<br />
(or until the illuminated ring around the USB ports in the<br />
front door goes out) and then turn the 12V switch back to ON.<br />
12 13