Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ENGLISH<br />
Both kinds of grinders can be selected and<br />
by using buttons ▲ and ▼ the percentage<br />
of coffee to be used by each grinder can<br />
be selected, too.<br />
The selection is activated for a single delivery.<br />
CHARACTERISTICS OF THE 2 KEY<br />
CONFIGURATION<br />
The machine is provided with 2 keys: a T<br />
key (Manager/Visualisation), and a U key<br />
(Proprietor/Technician)<br />
By using the U key, you can access all the<br />
functions of the coffee machine.<br />
By using the T key you only can:<br />
• select doses<br />
• activate unit, milk spout or full washing<br />
cycles<br />
• read doses and washings with the<br />
exception of the absolute total<br />
• access system data<br />
No operation of resetting or modification is<br />
possible.<br />
CHARACTERISTICS OF THE 15 KEY<br />
CONFIGURATION<br />
In this case the machine is provided with<br />
15 keys subdivided as follows:<br />
• Waiters: keys A01 ÷ S13<br />
• Manager/Visualization key T14<br />
• Proprietor/Technician key U15<br />
The Manager/Visualization and<br />
Proprietor/Technician key functions are<br />
those described in the previous paragraph.<br />
Each waiter key can:<br />
• Select doses<br />
• Activate unit or milk circuit washing<br />
cycles<br />
• Read doses and washings with the<br />
exception of the absolute total<br />
• Access system data<br />
40<br />
SPECIAL FUNCTIONS<br />
This section can be accessed by pressing<br />
the ▼ button. In the 2 key version, if the T<br />
or U key is not inserted, the insertion of a<br />
key is required to access the special functions.<br />
In the 15 key version, to start off from the<br />
MACHINE READY position, first a key<br />
must already be inserted and then you<br />
must press ▼.<br />
Access to the special functions section is<br />
displayed by the visualization of the first<br />
message of the menu: WASHING.<br />
Browsing the special functions and the<br />
parameters menu is carried out by means<br />
of the following buttons:<br />
• use buttons ▲ and ▼ to browse the<br />
menu and submenu vertically or to<br />
modify values during parameters input<br />
• use the ENTER button to browse the<br />
menu and submenu horizontally or to<br />
confirm the modified parameters by<br />
passing to the next parameter<br />
• use the RESET button to return to the<br />
preceding menu level without confirming<br />
the inserted value<br />
• use the button to switch the<br />
machine off and to directly enter the<br />
OFF position without confirming the<br />
value inserted;<br />
• the , , , buttons<br />
are disactivated.