1 - Nuova Simonelli

ENGLISH
46
TYPE OF BEVERAGE
disabled
1 short coffee
2 short coffees
1 long coffee
2 long coffees
1 carafe
1 jug
1 cappuccino
2 cappuccinos
1 white coffee
2 white coffees
1 milk
2 milks
The description of the type of beverage
will then be shown on the display each
time we want to review the description of
the button.
The ENTER button confirms the value and
you can proceed to the following paragraph.
The RESET button takes you back to the
previous menu: BUTTON SELECTION
leaving the value of the parameter as it
was before the alteration.
Right or left grinder
The grinder associated with the button
selected, , is defined.
The ▼ and ▲ buttons allow you to select
the grinder: right grinder or left grinder.
The ENTER button confirms the value and
you can proceed to the following paragraph.
The RESET button takes you back to the
previous menu leaving the value of the
parameter as it was before the alteration.
Pre-infusion
The pre-infusion time of the dose is programmed.
The ▼ and ▲ buttons allow you to alter the
pre-infusion time: 0.0÷10.0 sec., step 0.1
sec. Setting 0.0, the pre-infusion is disabled.
The ENTER button confirms the value and
you can proceed to the following paragraph.
The RESET button takes you back to the
previous menu leaving the value of the
parameter as it was before the alteration.
Discharge
The discharge time is programmed (time
needed for drying the coffee PASTIGLIA
after delivery). The ▼ and ▲ buttons allow
you to alter the discharge time: 0.0÷10.0
sec, step 0.1 sec. With a setting of 0.0 the
discharge is disabled.
The ENTER button confirms the value and
you can proceed to the following paragraph.
The RESET button takes you back to the
previous menu leaving the value of the parameter
as it was before the alteration.
Upper motor
The running time of the upper motor is
programmed before running the lower
motor during the discharge phase. The
buttons ▼ and ▲ allow you to alter the running
time: 0.5-1.5 sec. Step 0.1 sec.
The ENTER button confirms the value and
you can proceed to the following paragraph.
The RESET button takes you back to the
previous menu leaving the value of the
parameter as it was before the alteration.
Lower motor
The running time for the upper motor is
programmed from the beginning of the
cycle to define the compression of the coffee
powder.
The ▼ and ▲ buttons allow you to alter
the discharge time: 0.0÷10.0 sec. With a
setting of 0.0 the discharge is disabled.
The ENTER button confirms the value and
you can proceed to the following paragraph.
If it is the last parameter of the
dose go back to the previous menu.
The RESET button takes you back to the
previous menu leaving the value of the
parameter as it was before the alteration.
Button parameters
The following table lists the parameters
requested for programming the buttons for
each type of beverage.
COFFEE SELECTIONS
Parameter Range Step
priority grinder right grinder -
left grinder
pre-infusion 0.0÷10.0 sec. 0.1 sec.
discharge time 0.0÷10.0 sec. 0.1 sec.
upper motor time 0.5÷1.5 sec. 0.1 sec.
lower motor time 0.0÷1.0 sec. 0.1 sec.
CAPPUCCINO SELECTIONS
Parameter Range Step
priority grinder right grinder -
left grinder
pre-infusion 0.0÷10.0 sec. 0.1 sec.
discharge time 0.0÷10.0 sec. 0.1 sec.
upper motor time 0.5÷1.5 sec. 0.1 sec.
lower motor time 0.0÷1.0 sec. 0.1 sec.
sequence milk-coffee -
coffee-milk
milk discharge 0.0÷5.0 sec. 0.1 sec.
MILK SELECTIONS
Parameter Range Step
milk discharge 0.0÷5.0 sec. 0.1 sec.
CAFFE LATTE SELECTIONS
Parameter Range Step
priority grinder right grinder -
left grinder
pre-infusion 0.0÷10.0 sec. 0.1 sec.
discharge time 0.0÷10.0 sec. 0.1 sec.
upper motor time 0.5÷1.5 sec. 0.1 sec.
lower motor time 0.0÷1.0 sec. 0.1 sec.
milk discharge 0.0÷5.0 sec. 0.1 sec.