dB - Operator's Manual - John Deere

34 EN
– 10 A fuse = protects the main and power circuits of
the electronic board. When it blows, the machine
stops and the dashboard light switches off.
– 25 A fuse = protects the battery charger circuit.
When it blows, the battery gradually runs out and
the machine will have problems starting.
The fuse capacity is indicated on the fuse.
IMPORTANT A blown fuse must always be replaced by one of the same type
and ampere rating, and never with one of another rating.
If problems persist, contact Your Dealer.
6.4.5 Dismantling, replacing and remounting the blade
WARNING!
Always wear work gloves when handling the blade.
WARNING! Damaged or bent blade must always be replaced; never try
to repair it! ALWAYS USE ORIGINAL BLADES BEARING THE SYMBOL !
Only blades with the following codes must be used on this machine:
84109503/0 or 84109502/0
MAINTENANCE
IMPORTANT Both of the blades should be replaced together, especially when
there are slight differences in wear.
1