INSTRUCTION BOOK MANUAL DE INSTRUCCIONES ... - Janome

Replacing the Bobbin Holderzz Insert the bobbin holder into the hook race.xx Make sure the knob of the bobbin holder fits next tothe stopper on the race.q Knobw Stopperwcqec Replace the bobbin.Attach the needle plate, inserting the two guide pinsinto the holes in the needle plate. Tighten the screwfirmly with the screwdriver.e Guide holesr ScrewreReplacing the Light BulbWARNING:When replacing the bulb, switch off and unplug themachine.Wait for the light bulb to cool down before touching it.qwetrRemove the cap and screw. Remove the face plate.q Capw Screwe Face platePull the bulb out from the lamp socket.Insert a new bulb into the lamp socket.Attach the face plate.r Light bulbt Lamp socket84