RUN 600 - tormatic

Declaration of Conformity and InstallationGBDeclarationfor the installation of an incomplete machinein accordance with the Machinery Directive 206/42/EC, annex II part 1Bhereby declares that the garage door opertorsNovoferm tormatic GmbHOberste-Wilms-Str. 15aD-44309 DortmundRUN 600, RUN 601, RUN 602as from the marking 01/10 (week/year) comply with the Machinery Directive 2006/42/EC and is intendedfor installing into a door system.•---The following basic safety requirements in accordance with annex I hereto were appliedGeneral principles no. 11.2.1 Safety and reliability of control systems:Integrated force limit: kat.2/PLCInput STOPA: kat.2/PLCInput STOPB: kat.2/PLCIn doing so, the harmonized standards EN13849-1 were applied.1.1.2, 1.1.3, 1.2.4, 1.2.6, 1.3.1, 1.5.1, 1.7.4 (partial):•The technical documents in accordance with annex VII B were drawn up.documents in writing to the market supervising authorities at their reasoned request.We shall submit the special•Conformity is in accordance with the provisions of the EC Construction Products Directive 89/106/EC.For the part "Operating Forces" the corresponding initial tests in cooperation with the recognized testingbodies were performed. In doing so, the harmonized standards EN13241, EN12453 and EN12445 wereapplied. For detailed information on the tested combinations, see attached table “System Audit tormaticoperators”or www.tormatic.de.•Conformity is in accordance with the Low-voltage Directive 2006/95/EC•Conformity is in accordance with the EMC Directive 2004/108/ECThe product may not be put into service until it has been established that the door system complies withthe provisions of the Machinery Directive.Dortmund, 29.12.2009 ___________________Ulrich TheileHead of DevelopmentOfficial Documentation RepresentativeRetain these installation, operating and maintenance instructions for the full duration of the operator’s service life!GBProof of inspection and maintenance of the door systemDate Work performed / necessary measuresTest carried outSignature / addressof the companyDefects rectifiedSignature / addressof the companyInitial operation, first testingRetain these installation, operating and maintenance instructions for the full duration of the operator’s service life!