Pioneer DEH-P7500MP - User manual - anglais, espagnol
Pioneer DEH-P7500MP - User manual - anglais, espagnol
Pioneer DEH-P7500MP - User manual - anglais, espagnol
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Initial Settings<br />
Section<br />
10<br />
Note<br />
The tuning step remains at 50 kHz during <strong>manual</strong><br />
tuning.<br />
Switching Auto PI Seek<br />
The unit can automatically search for a different<br />
station with the same programming, even<br />
during preset recall.<br />
1 Press FUNCTION to select Auto PI.<br />
Press FUNCTION repeatedly until Auto PI appears<br />
in the display.<br />
2 Press a or b to turn Auto PI on or off.<br />
Pressing a or b will turn Auto PI on or off<br />
and that status will be displayed (e.g.,<br />
Auto PI : ON).<br />
Switching the warning tone<br />
If the front panel is not detached from the<br />
head unit within five seconds of turning off the<br />
ignition, a warning tone will sound. You can<br />
turn off the warning tone.<br />
1 Press FUNCTION to select Warning.<br />
Press FUNCTION repeatedly until Warning<br />
appears in the display.<br />
2 Press a or b to turn Warning on or off.<br />
Pressing a or b will turn Warning on or off<br />
and that status will be displayed (e.g.,<br />
Warning : ON).<br />
using auxiliary equipment connected to this<br />
unit.<br />
1 Press FUNCTION to select AUX.<br />
Press FUNCTION repeatedly until AUX appears<br />
in the display.<br />
2 Press a or b to turn AUX on or off.<br />
Pressing a or b will turn AUX on or off and<br />
that status will be displayed (e.g.,<br />
AUX : ON).<br />
Switching the dimmer setting<br />
To prevent the display from being too bright at<br />
night, the display is automatically dimmed<br />
when the cars headlights are turned on. You<br />
can switch dimmer on or off.<br />
1 Press FUNCTION to select Dimmer.<br />
Press FUNCTION repeatedly until Dimmer appears<br />
in the display.<br />
2 Press a or b to turn Dimmer on or off.<br />
Pressing a or b will turn Dimmer on or off<br />
and that status will be displayed (e.g.,<br />
Dimmer : ON).<br />
Adjusting the brightness<br />
You can adjust the display brightness. Initially<br />
this mode is set to 12.<br />
1 Press FUNCTION to select Brightness.<br />
Press FUNCTION repeatedly until Brightness<br />
appears in the display.<br />
English<br />
Switching the auxiliary setting<br />
It is possible to use auxiliary equipment with<br />
this unit. Activate the auxiliary setting when<br />
En 45