Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Owner’s Manual<br />
III. Attaching the turbo fan<br />
Turbo Fan<br />
Place Turbo Fan (#13) onto the Turbo Axle (#20) with the blade’s flat side toward the center of the<br />
machine. The Turbo Fan should “lock into position”. You will feel each blade fit snugly when they have<br />
seated properly. Place the m10 washers (#64) and m10 lock nuts (#65) into place on each Turbo Axle<br />
and hand tighten. Using both 17mm sockets provided, tighten both lock nuts down firmly.<br />
Note: The blades can become damaged if, while you are exerting pressure on the lock nuts, your hand<br />
slips off and hits them. Tighten until firm only.<br />
Turbo Fan Covers<br />
Each Turbo Fan Cover (#62) has a small lip on the top and a larger lip on the bottom. Hold the cover<br />
vertically and align the lip with the key on the upper and bottom chain covers and insert into track.<br />
Turn the cover counter clockwise into position with the OrbiTrek Pro logo and vents on the top.<br />
If you have any trouble getting the Turbo Fan Cover to fit into the key, try tilting the cover slightly<br />
so that the upper key and lip fit first and then do the bottom.<br />
65<br />
64<br />
10<br />
Chain Cover<br />
5<br />
51<br />
20<br />
Fig. 2<br />
64<br />
62<br />
65<br />
13
Change language