HYDROLINE STEAM - HOBART GmbH

Selecting the units of measurement
You can choose between European, American and international units of measurement on the
display.
For European units of measurement: depending on the type of fi lter system (STD, STM or GYP),
select the specifi ed unit of measurement for water hardness °KH, °EH, °FH or ° DH. The unit of
volume and date format are then automatically displayed in litres and DD/MM/YY respectively.
For American units of measurement, select gpg (unit of measurement for water hardness); the
unit of volume and the date format are then automatically displayed in US gallons and MM/DD/YY
respectively.
For international units of measurement, select mg/L (unit of measurement for water hardness);
the unit of volume and the date format are then automatically displayed in litres and DD/MM/YY
respectively.
Parameterisation
The following parameters have to be entered:
• Filter system type and size
STM 12 = HYDROLINE STEAM
• Water hardness unit and water hardness value
The following units of hardness may be selected for the various types of fi lter system:
24
Unit of carbonate hardness for fi lter system types STM:
°KH (German unit of hardness)
°EH (English unit of hardness)
°FH (French unit of hardness)
gpg (American unit of hardness)
mg/L (international unit of hardness)
• Monthly limit 2–12
Carbonate Hardness Type/Filter System Size
Exhaustion after months
Date fi eld
• Reminder function fi lter usage period in months
Irrespective of the remaining capacity display function, you can set a monthly limit of
2–12 months to activate a reminder function for fi lter replacement. If the monthly limit has been
reached up to a month before the export of the set time limit, it is signalled by the date fi eld
fl ashing. Factory set to 12 months.
Example: When set to 9 months, the date fi eld starts to fl ash on the display after 8 months.
Operating the display unit
To operate the display unit, it must be removed from the connecting fi ttings.
Slide the display housing up approx. 10 mm and pull off the display unit.
The display unit is operated using a button on the back of the display unit.
The display unit is supplied in standby mode. To activate the display, press the
button on the back once briefl y and then reset after inputting the parameters.