HYDROLINE STEAM - HOBART GmbH

Error level E2 indicates whether and from when until when an error has occurred at the outlet water
meter. Display is similar to level E1.
Program Overview
20 sec. no activity Operating mode
Carbonate hardness
Capacity By-pass
last fi lter change date
30 sec.no activity =
no Parameter acceptance
1 x button Press button 4 seconds
32
Retrieval mode
ID-Information
���
00 Current level
���
-1 History level 1
���
-2 History level 2
���
-3 History level 3
���
-4 History level 4
���
E1 Error inlet metre
���
E2 Error drainage metre
10 Troubleshooting
Parameterisation
Filter system type and size 2 sec.
���
Type of hardness (unit)
and value 2 sec.
���
Monthly limit 2 sec.
���
RESET 2 sec.
���
Parameter acceptance
10.1 No water fl ow
Cause: Water intake closed.
Troubleshooting: Open water intake on the upstream stop valve or inlet valve 7 on inlet hose 6 .
! Caution: The following faults may be remedied only by trained and authorised personnel.
10.2 No or low water fl ow in spite of open water intake
Cause: Mains pressure too low.
Troubleshooting: Check mains pressure.
If the fault continues in spite of adequate mains pressure, check the fi lter
system and fi lter cartridge and change if necessary.
! Caution: Prior to changing, read the Technical Data (Chapter 12) and the
Operating and Safety Information (Chapter 3).
10.3 Leak at Screwed Connections
Cause: Screwed connections not fi tted correctly.
Troubleshooting: Check mains pressure. Check all screwed connections and mount according to
Chapter 4.
If the fault continues, exchange fi lter system.