HYDROLINE STEAM - HOBART GmbH

The bypass position can be adjusted to the local water quality or the machine type.
The following recommendations for bypass settings apply by default:
Position 0: All devices in areas with an extremely high water hardness level (> KH = 22 °KH).
Position 1: Combi ovens and conventional ovens with direct injection system
Position 2: Combi ovens and conventional ovens with boiler system
Position 3: All devices in soft water areas (< KH = 7 °KH).
You can obtain individual recommendations from your Hobart contact.
Note: The stated capacities have been tested and calculated on the basis of common application
and machine conditions. External factors (such as fl uctuating crude water quality and/or machine
type) can cause deviations from this information.
8 Repair
Regularly check the fi lter system for leaks. Regularly check the hoses for kinks. Bent hoses must be
replaced.
The complete fi lter system must be replaced in rotation after a maximum of ten years.
The hoses must be replaced in rotation after a maximum of fi ve years.
! Caution: Prior to changing, read the Technical Data (Chapter 12) and the Operating and Safety
Information (Chapter 3).
Regularly clean the outside of the fi lter system with a soft, damp cloth.
! Caution: Do not use any substances incompatible with the material (Chapter 3.4) or astringent,
abrasive cleaning agents.
9 Query Mode
The following data can be queried in the query mode:
Production data
• Briefl y press button once (< 1 second); the following message appears.
30
ID Level Production Year
Serial Appliance Number Battery Service Life
Production year: Example 08 = 2008
Device number: consecutive
Useful battery life: Example 31/12/19 = The battery in the display unit will be exhausted on
31/12/19 and the complete fi lter system has reached its max. usage period.