Manuale DOLPHIN - Intek

Operation
English
channels), I (International channels) or C (Canadian channels) will flash on the LCD display.
2. Press the UP (5) or DOWN (7) keys to select the desired frequency band.
3. To confirm the selection and exit the Menu Mode, press the PTT key (15) or press the
MENU (8) key to move to the next function.
Meteo Weather Channel Selection
The 10 Weather Channels (WX Band) may be enabled and may be selected after the normal
operating channels, in the selected band. To select the Meteo weather channels, please
procees as follows :
1. Press the MENU (8) key several times, until the 01 (P) indication appears and the W (E)
icon will blink on the LCD display.
2. Press the UP (5) or DOWN (7) keys to set the desired selection on (function enabled) or
oF (function disabled).
3. To confirm the selection and exit the Menu Mode, press the PTT key (15) or the MENU (8) key.
4. If the Meteo channels are enabled, the icon W (E) appears on the LCD display.
MEMORY CHANNEL OPERATION
Programming Memory Channels (1-8)
La radio is equipped with 8 programmable memory channels. To store a channel in one of the 8
memory channels, please proceed as follows :
1. Select the desired channel number as indicated at page 11.
2. Press and hold the MENU (8) key for about 3 seconds to enter the MEMORY MODE. The
M icon (S) will blink on the LCD display.
3. Press the UP (5) or DOWN (7) keys to select one of the 8 memory channels (1-8). If the
memory channel 0 is selected, no channels can be stored as a memory channel. If a
memory channel has been already programmed and stored, a new programming will
replace the previous on (overwriting).
4. Shortly press the PTT (15) key to confirm the selection and store the memory channel.
The radio will enter in Stand-by mode.
Memory Channels Recall
1. Press and hold the MENU (8) key for about 3 seconds to enter the MEMORY MODE. The
M icon (S) will blink on the LCD display.
2. Shortly press the PTT (15) key to enter the MEMORY RECALL MODE. The radio will
- 15 -