Views
2 weeks ago

Sony PCG-C1VE - PCG-C1VE Istruzioni per l'uso Inglese

Sony PCG-C1VE - PCG-C1VE Istruzioni per l'uso Inglese

Getting Help

Getting Help Troubleshooting n N 76 Sony Notebook Computer User Guide About sound My speakers are not producing sound Thebuilt-inspeakersmaybeturnedoff.PressFn+F3 to turn on the speakers. The speaker volume may be turned to the minimum. Press Fn+F4, and then press V or b to increase the volume. If nothing happens after having pressed Fn+F3 or Fn+F4, double-click System in Control Panel. Open the Device Manager tab and make sure that the sound device is enabled. If your computer is powered by battery, check that the battery is inserted properly andthatitischarged. If you are using an application that has its own volume control, check that the volume is turned up. Check the volume controls in Windows ® . If you use external speakers, check that the speakers are properly connected and the volume is turned up. If the speakers have a mute button, make sure it is off. If batteries power the speakers, check that the batteries are inserted properly and that they are charged. If you have connected an audio cable to the Headphone connector, disconnect the cable. I can hear background noise when I play back music Try to use the Media Bar software instead of Windows Media Player. My microphone does not work If you are using an external microphone, check that the microphone is plugged into the Microphone connector.

Getting Help Troubleshooting n N 77 Sony Notebook Computer User Guide An error message appears when using voice-related software programs Double-click Yamaha DS-XG Audio Config in Control Panel. Open the Echo tab and deselect the Enable check box. Click OK. If you are using several voice-related software programs at the same time, close them. About the modem My modem (PC card) doesn’t work Check that your PC card is properly inserted into your computer (label side facing up). Check that your PC card modem has been detected by the system. Check that the phone line is plugged into your PC card. Check that the phone line is working. You can check the line by plugging in an ordinary phone and listening for a dial tone. Check that the phone number the program is dialing is correct. Check that the communication software you are using is compatible with the PC card: make sure that the driver selected in your communication software matches your PC card programming (refer to your communication software user manual). Check that your PC card modem responds to AT-commands by doing a diagnostics test: Click Start, gotoSettings, click on Control Panel, then select Modems and click the Diagnostics tab. Select the COM One Platinium Card Discovery V90 modem and press More Info.