26.11.2012 Views

Installationsanvisninger - Fisher & Paykel

Installationsanvisninger - Fisher & Paykel

Installationsanvisninger - Fisher & Paykel

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Water filter (where fitted)<br />

All the water to your fridge is filtered to remove impurities through a cartridge located in a<br />

position of your choice outside the refrigerator. This will need changing approximately every<br />

6 months.<br />

The icon will appear when the filter needs replacing.<br />

Replacement cartridges are available from your authorised <strong>Fisher</strong> & <strong>Paykel</strong> Dealer.<br />

Changing the water filter cartridge<br />

1 Grasp and firmly twist the cartridge anticlockwise (Diagram 1).<br />

2 Pull the cartridge away from the filter head (Diagram 2).<br />

3 Discard old filter.<br />

4 Filter installation:<br />

– Remove protective cap on spigot on head.<br />

– Push the cartridge up towards filter head while rotating clockwise (Diagram 3).<br />

5 Dispense water for 3 – 5 minutes to flush the cartridge, removing trapped air and harmless<br />

carbon fines.<br />

6 Reset filter indicator icon on the display. Refer to page 26.<br />

Diagram 1 Diagram 2<br />

Diagram 3<br />

Fig.24 Changing the water filter cartridge<br />

25<br />

EN

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!