ATH-Heinl Bedienungsanleitung Hubtisch T15

3.0 OPERATION
3.1 Operating Instructions
Company:
Place of work:
Operating Instructions
for
Lifting Platform
Risks to People and the Environment
• Falling of loads or parts
• Crushing and shearing points when moving the lifting platform
• Danger due to uncontrolled moving parts
Protective Measures and Rules of Conduct
Before starting work:
• Lifting platforms may only be used independently by trained persons over the age
of 18 who have been instructed in writing.
• When working with more than one person, a supervisor must be appointed
• Daily functional check
• Observe the manufacturer’s operating instructions
During operation:
• Pay attention to crush and shear points in the environment
• Do not load the lifting platform above the permitted maximum load
• Do not lift people
• Do not shake the lifting platform, avoid rocking.
• When lowering, do not stand in the lifting platform movement area
• Arrange regular checks of the lifting platform
Response to faults and hazards
• In case of fault, stop the lifting platform immediately
• Secure against further use
• Report defects to the installer or manufacturer
First Aid
• Inform first aiders (see alarm/emergency plan)
• Treat injuries immediately
• Enter into the accident book
• Contact emergency services for serious injuries
Emergency number: _____________
Ambulance service: _______________
Date:
Signature:
Maintenance
• Repair only by instructed and trained persons
• Disconnect or secure the lifting platform from the mains power supply for set-up,
adjustment, maintenance or servicing
• Clean the lifting platform after operation and check the hydraulic level
• Annual check of the lifting platform by an authorised and trained person
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-08
Manufacturer ATH-Heinl GmbH & CO.KG
- 22 -