Versionshinweise zum HP Smart Update Manager - Business ...

Unterstützte Switches
Von HP SUM werden die folgenden Switches unterstützt:
• Brocade
◦
16Gb
Unterstützte Firmwareversion (Minimum): 7.0.0x
Erforderliche Firmware-Zwischenaktualisierungen: 7.0.0x > 7.0.1a
– HP SN3000B 16Gb 24/12 Fibre Channel Switch
– HP SN3000B 16Gb 24/24 Fibre Channel Switch
– SN6000B 16Gb 48-port/24-port Active FC Switch, Power Pack+
– SN6000B 16Gb 48-port/48-port Active FC Switch, Power Pack+
– SN8000B 8-slot SAN Backbone Director Switch, Power Pack+
– SN8000B 4-slot SAN Director Switch, Power Pack+
◦ 8GB
Unterstützte Firmwareversion (Minimum): 6.3.2x
Erforderliche Firmware-Zwischenaktualisierungen: 6.3.2x > 6.4.2b > 7.0.1a; 6.4.2x >
7.0.1a; 7.0.0x > 7.0.1a
– DC04 SAN Director Switch, Power Pack+
– DC SAN Backbone Director Switch Power Pack+
– 8/8 Base, SAN Switch
– 8/24 SAN Switch
– 8/40 SAN Switch, 8/40 Power Pack
– 8/80 SAN Switch, 8/80 Power Pack
– Encryption SAN Switch
– EVA4400 Embedded Switch Module, 8GB
– 8GB SAN Switch for HP BladeSystem c-Class, 8/12c
– 8GB SAN Switch for HP BladeSystem c-Class, 8/24c
– 8GB SAN Switch for HP BladeSystem c-Class, 8/24c Power Pack+
– DC SAN Director Multiprotocol Extension Blade
– DC SAN Director 10/24 FCoE Blade
– DC Switch Encryption FC Blade
– 2408 FCoE Converged Network Switch
– 1606 Extension SAN Switch
◦ 4GB (größere CompactFlash-Karte)
4 Betriebssysteme und Geräte
Unterstützte Firmwareversion (Minimum): 6.2x
Erforderliche Firmware-Zwischenaktualisierungen: 6.2.x > 6.3.2d > 6.4.2b; 6.3.x > 6.4.2b;
6.4.x > 6.4.2b
– SAN Switch 4/32 Base, 4/32 Full Fabric und 4/32 Power Pack
– SAN Switch 4/32B Base, 4/32B Full Fabric und 4/32B Power Pack
– SAN Switch 4/64 und 4/64 Power Pack
– 4/256 SAN Director, 4/256 SAN Director Power Pack