Akku-Lade-Center Battery Charging Centre ALC 8500-2 ... - Batimex

Weitere Magazine

Empfehlungen

Info

The detailed information displayed is as follows: the battery technology (type) selected for the function currently running, the battery voltage, the charge current and the capacity of the selected channel. The bottom half of the screen continues to display the overall summary of all four channels. Channel not used Charge Charged (full) Discharge Discharged (empty) Waiting Pause Puls-Charge Error Fig. 3: The symbols available in the graphic area, and their meaning 42
10.3 Channel windows In addition to the main window, four channel windows are available which can be called up using the arrow buttons under the screen. When a channel window is called up, the whole screen is available for that channel. Fig. 4 shows the functions now available using the arrow buttons. For example, if you select a channel window, you can read off the currently running function in the bottom part of the screen, or monitor the progress of the function, or check the remaining time for that process. The jog dial is used to select the channel window display in the bottom part of the screen. Starting from the display of the currently running function, turn the jog dial one click to the right to display the programmed charge and discharge currents, and one click more to display the processing time still required and the time already elapsed (Fig. 5). If you rotate the jog dial to the left, the available information is simply displayed in the reverse sequence. Please note that the stated times are approximate, and should only be considered as estimations, and even then only where a time prognosis is possible in any way for the selected function. For example, an accurate time forecast for the Cycle function is impossible, as the <strong>ALC</strong> <strong>8500</strong>-2 Expert cannot predict how many charge / discharge cycles have to be completed before the battery reaches its maximum capacity. In this case a time estimate is only displayed when the final cycle is reached. Fig. 6 shows the symbols associated with the time displays. The bottom half of the screen displays the message “Channel not used” if you select a channel to which no battery is assigned. In this case the top half of the screen displays the channel information as in the main window. Main window Channel window Channel 1 Channel window Channel 2 Channel window Channel 3 Channel window Channel 4 Main window Fig. 4: Selecting the channel window using the arrow buttons below the screen Remain (residual time) Elapsed (elapsed time) Fig. 5: Time prognosis (channel 1) Fig. 6: Time prognosis symbols 10.4 Channel LEDs Above each pair of output sockets you will find an LED indicator which displays the status of the associated charge / discharge channel. As soon as a processing program is started, the LED associated with that channel lights up. At the conclusion of the processing program the corresponding LED flashes briefly every 1.5 seconds; this indicates that the trickle charge function is under way; this automatically follows every charge process. If the charger automatically terminates the process for any reason, the corresponding LED flashes at a high rate to alert you to a problem. 43
Seite 1 und 2: Akku-Lade-Center Battery Charging C
Seite 3 und 4: Inhalt: 1 Allgemeines .............
Seite 5 und 6: Tabelle 1: Leistungsdaten des ALC 8
Seite 7 und 8: - Setzen Sie das Gerät bei Unklarh
Seite 9 und 10: 4 Ladeverfahren, Ladeausgänge Wäh
Seite 11 und 12: In der Regel bleiben diese Übergan
Seite 13 und 14: 8 Datenlogger Der Datenlogger dient
Seite 15 und 16: 10.3 Kanalfenster Neben dem Hauptfe
Seite 17 und 18: 12.3 Conf. Bat. (Akkus konfiguriere
Seite 19 und 20: 12.4 Function Nach Aufruf des Menü
Seite 21 und 22: Nach Auswahl der gewünschten Bearb
Seite 23 und 24: 14 Conf.-Menu Das Konfigurationsmen
Seite 25 und 26: CyCy NC Maximale Zyklenzahl für NC
Seite 27 und 28: Solange nach der Beendigung des Bea
Seite 29 und 30: 19 Wartung und Pflege Reinigen Sie
Seite 31 und 32: GB Contents: 1 Introduction .......
Seite 33 und 34: Table 1: performance data of the AL
Seite 35 und 36: - If you are not sure about any asp
Seite 37 und 38: 4 Charge processes, charge outputs
Seite 39 und 40: However, these transfer resistances
Seite 41: 8 Data logger The purpose of the da
Seite 45 und 46: 12.3 Conf. Bat. (configuring batter
Seite 47 und 48: 12.4 Function When you call up the
Seite 49 und 50: After you have selected the process
Seite 51 und 52: 14. Conf. menu The configuration me
Seite 53 und 54: CyCy NiMH Maximum cycle count for N
Seite 55 und 56: When a process is concluded and the
Seite 57 und 58: 19 Maintenance, care Always disconn
Seite 60: ELV AG • PF 1000 • D-26787 Leer

Akku-Lade-Center Battery Charging Centre ALC 8500-2 ... - Batimex

Erfolgreiche ePaper selbst erstellen

Template löschen?

Als Template speichern?