Bedienungsanleitung herunterladen (PDF) - Rademacher

Adjust power limiting as requiredGBNOTEThe door operator is preset to stage 3 by the supplier. Ifrequired (e.g. if the power level is too low) you cansubsequently adjust the power limiting setting.If the power level is too low, the doormovement will be impaired, particularly if themechanical structure of the door is not wellbalanced.1. Press „+“ (if necessarypress several times) until„4“ is displayed.2. Press „P“, the displayshows „7“ (stage 3).3. Press „+“ or press „-“to select the stage.LowPower levelHighFactory setting4. Press „P“, in orderto store the setting.5. IMPORTANTRepeat reference runfor power limiting(refer to page 48).6. Conclude programming(refer to page 53,method 1).After a resetting of the power level, it is absolutely necessary to repeat the reference run for powerlimiting and to conclude the programming again.During the reference run there is a risk of injury as the door operator develops extremely strongforces.49