Bedienungsanleitung herunterladen (PDF) - Rademacher

Set control button of hand transmitterGBNOTEThe actuation of the door is preset by the supplier tocorrespond to the first button of the hand transmitter.„0“ means that no button has been selected.1. Press „+“ (if necessarypress several times) until„5“ is displayed.2. Press „P“,„2“ flashes.(2 = factory setting)3. Press „+“ or „-“ to selectthe required channel.1 = button 12 = button 24. Press button „P“ inorder to store thesetting.5. Conclude programming(refer to page 53, method 2)orproceed to next setting.50