Bedienungsanleitung herunterladen (PDF) - Rademacher

Conclude programmingGBIMPORTANTPlease note: this concluding step must be carried out,otherwise the information stored will be lost.NOTEYou can conclude the programming in two ways:Method 1: Carry out this method without fail after the reference run.1. After the reference run,press „-“ (press severaltimes if necessary) until„1“ is displayed.2. Keep „P“ pressedfor 5 seconds.3. „0“ will be displayed atregular intervals in order toconclude the programmingand set the door operatorinto an idle state.Method 2: After all other settings1. After completing anysetting, press „P“for 5 seconds.2. „0“ will be displayed atregular intervals in orderto conclude the programmingand set the door operatorinto an idle state.53