SR 1601 D3 / LPG3 / P3 - Nilfisk PARTS - Nilfisk-Advance

ENGLISHUSER MANUALINTRODUCTIONNOTEThe numbers in brackets refer to the components shown in Machine Description chapter.MANUAL PURPOSE AND CONTENTSThe purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe andautonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.Before performing any procedure on the machine, the operators and qualifi ed technicians must read this Manual carefully. ContactNilfi sk in case of doubts concerning the interpretation of the instructions and for any further information.TARGETThis Manual is intended for operators and technicians qualifi ed to perform the machine maintenance.The operators must not carry out operations reserved for qualifi ed technicians. Nilfi sk will not be responsible for damages comingfrom failure to follow these instructions.HOW TO STORE THIS MANUALThe User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can causedamage to it.DECLARATION OF CONFORMITYThe declaration of conformity, supplied with the machine, certifi es the machine conformity with the law in force.NOTETwo copies of the original declaration of conformity are provided together with the machine documentation.IDENTIFICATION DATAThe machine model and serial number are shown on the plate (10) placed on the frame.The machine model year is written in the declaration of conformity and it is also indicated by the fi rst two fi gures of the machineserial number.The engine model and serial number are shown on the plate (31).This information is useful when ordering machine and engine spare parts. Use the following table to write down the machine andengine identifi cation data for any further reference.MACHINE model ...............................................................................MACHINE serial number ...................................................................ENGINE model ..................................................................................ENGINE serial number ......................................................................OTHER REFERENCE MANUALS– Engine Manual, supplied with the machine, to be considered an integral part of this Manual.– The following Manuals are also available:• Spare Parts List (supplied with the machine)• Service Manual (that can be consulted at any Nilfi sk Service Center)2 33019216(2)2009-05 A SR 1601 D3 / LPG3 / P3