SR 1601 D3 / LPG3 / P3 - Nilfisk PARTS - Nilfisk-Advance

ENGLISHUSER MANUALSCHEDULED MAINTENANCE TABLENOTEMaintenance intervals given are for average operating conditions. Machines used in severe operational environmentsmay require service more often.Procedure Upon delivery DailyAfter thefirst 50hoursEvery 30hoursEvery150hoursEvery300hoursEvery1,000hoursEngine coolant checkEngine oil level checkHydraulic oil level checkParking brake checkMain and side broom cleaningEngine oil change (1) (1)Oil fi lter element replacement (1) (1)V-belt check (1) (1)Engine coolant circuit check (1)Battery checkDust guard system water fi lter check and cleaning(optional)Engine air fi lter cleaning (2)Engine radiator and oil cooler cleaningBroom check and adjustmentHopper dust fi lter check and cleaning (“A” method) (2)Skirt integrity, height and operation checkHopper gasket integrity checkEngine maintenance (1) - (3)Steering wheel bearing and hydraulic pistonlubrication(1)Tank hydraulic oil fi lter replacement (1)Pump hydraulic oil fi lter replacement (1)Hopper dust fi lter check and cleaning (“B” method) (2)Fuel fi lter replacement (1)Fuel fi tting and screw tightening (1)Hopper dust fi lter check and cleaning (“C”method)(2)Hydraulic oil “recharge” fi lter replacement (1)Tank hydraulic oil change (1) - (4)(1)(2)(3)(4)For the relevant procedure, see the Service Manual.Or more often in dusty areas.Maintenance procedures to be performed by an authorised KUBOTA dealer.Change the hydraulic oil for the fi rst time after 500 hours, then every year.22 33019216(2)2009-05 A SR 1601 D3 / LPG3 / P3