SR 1601 D3 / LPG3 / P3 - Nilfisk PARTS - Nilfisk-Advance

ENGLISHUSER MANUALENGINE AIR FILTER CLEANING1. Drive the machine on a level floor, engage the parking brake and turn the ignition key (64) to “O”.2. Open the engine compartment hood (1) by using the unlocking push-button (25).3. Check the engine air fi lter service indicator (27) before each use of the machine.NOTEAfter cleaning or replacing the engine air fi lter, the service indicator can be reset by pressing the end of the indicator.WARNING!When servicing the engine air filter elements, use extreme care to prevent loose dust from entering the engine.Dust can severely damage the engine.4.5.Open the engine oil fi lter cover (24) and remove the paper pre-fi lter and synthetic fi lter.Clean the engine air fi lters and/or perform maintenance of the engine air fi lter element (24) as shown in the Engine Manual.ENGINE COOLANTWARNING!Do not remove the radiator cap (23) when the engine is hot.1.2.3.4.Drive the machine on a level floor, engage the parking brake and turn the ignition key (64) to “O”.Open the engine compartment hood (1) by using the unlocking push-button (25).Let the engine and engine coolant cool down, then open the radiator cap (23) with great care, to release the pressure.Remove the radiator cap (23) and check the coolant.If the level is low, add a mixture of half water and half automotive type anti-freeze, as shown in the Engine Manual.30 33019216(2)2009-05 A SR 1601 D3 / LPG3 / P3