13.07.2015 Aufrufe

SR 1601 D3 / LPG3 / P3 - Nilfisk PARTS - Nilfisk-Advance

SR 1601 D3 / LPG3 / P3 - Nilfisk PARTS - Nilfisk-Advance

SR 1601 D3 / LPG3 / P3 - Nilfisk PARTS - Nilfisk-Advance

MEHR ANZEIGEN
WENIGER ANZEIGEN

Erfolgreiche ePaper selbst erstellen

Machen Sie aus Ihren PDF Publikationen ein blätterbares Flipbook mit unserer einzigartigen Google optimierten e-Paper Software.

ENGLISHUSER MANUALTROUBLESHOOTINGThe machine does not moveProblem Possible cause RemedyThe main broom does not turnThe machine collects little debris/dustThe side broom does not workThe hopper dumping door does notcloseThe fi lter shaker motor does not workThe dust guard system (optional)does not workThe battery is disconnectedThe machine has run out of fuelThe fuses are trippedThe parking brake is engagedThe unlocking screw is not in a proper positionThe main broom is liftedDebris wrapped around the broom driveThe hopper is not fully loweredConnect the batteryRefuelReset any tripped fuseDisengageTurn it properlyLower the main broom with the leverRemove debrisFully lower the hopperThe vacuum system is offTurn on the vacuum system with the switchThe dust fi lter is cloggedClean the dust fi lterThe hopper is fullEmpty the hopperThe skirts are damaged or misadjusted Check the skirt for integrity and proper adjustment (*)The main broom height is incorrectAdjust the main broom heightThe fuses are trippedReset any tripped fuseThe side broom is liftedDebris wrapped around the broom driveThe hopper is not fully loweredThe dumping door is jammed by debrisThe fi lter shaker motor connector is not properlyconnectedThe fuse is trippedLower the side broom with the leverRemove debrisFully lower the hopperRemove debris and clean edges of dirt chamberConnect it properlyReset the tripped fuseThe switch is faulty Replace the switch (*)The nozzles or the water fi lter are clogged CleanThe pump is faultyReplaceThe fuse is trippedReset the tripped fuse(*) Procedure to be performed by Nilfi sk Service Center.For further information contact a Nilfi sk Service Center, where it is possible to consult the Service Manual.SCRAPPINGHave the machine scrapped by a qualifi ed scrapper.Before scrapping the machine, remove and separate the following materials, which must be disposed of properly according to thelaw in force:– Batteries– Polyester dust fi lter– Main and side brooms– Engine oil– Hydraulic system oil– Hydraulic system oil fi lter– Plastic components– Electrical and electronic components (*)(*) Refer to the nearest Nilfi sk Center especially when scrapping electrical and electronic components.32 33019216(2)2009-05 A <strong>SR</strong> <strong>1601</strong> <strong>D3</strong> / <strong>LPG3</strong> / <strong>P3</strong>

Hurra! Ihre Datei wurde hochgeladen und ist bereit für die Veröffentlichung.

Erfolgreich gespeichert!

Leider ist etwas schief gelaufen!