SR 1601 D3 / LPG3 / P3 - Nilfisk PARTS - Nilfisk-Advance

USER MANUALENGLISHFUELCAUTION!– Always stop the engine before filling the fuel tank.– Do not smoke while filling the fuel tank.– Fill the fuel tank in a well-ventilated area.– Do not fill the fuel tank near sparks or open flame.DIESEL AND PETROL ENGINE (SR 1601 D3 / SR 1601 P3)(Only for SR 1601 D3): If using the machine when the outside temperature is lower than 32°F (0°C), use diesel fuel for lowtemperatures.(Only for SR 1601 P3): Fill the tank (22) with unleaded fuel for vehicles.NOTEIf the diesel machine runs out of fuel completely, the fuel system must be bled before the engine can be re-started. Toavoid this situation, fi ll the fuel tank (22) when the fuel gauge (56) indicates 1/4 tank. Fuel tank capacity is 14 USgal (35litres).LPG ENGINEInstall an LPG tank (50) having characteristics which comply with the laws in force in the country where it used.Connect the fuel hose and open the cutoff valve on the tank. Always wear gloves when connecting and disconnecting the fuel hose.When the machine is not operating, close the LPG tank valve.NOTEPlace the LPG tank in a proper horizontal position. Connect the fuel hose to the tank and check that there are no gasleaks.DANGER!Do not use the machine in case of gas leaks. Disconnect the fuel hose and replace the LPG tank. If the gas leakpersists, disconnect the fuel hose and contact the Nilfisk Service Center.SR 1601 D3 / LPG3 / P3 33019216(2)2009-05 A 17