CNC 8037 - Installation manual - Fagor Automation

Installation manual
Enclosure
The minimum distance from each side of the monitor to its enclosure in order to guarantee the
required ambient conditions is shown below:
180 [7.087]
335 [13.2]
6 [ 0.236] 323 [12.72]
M5x0.7
50 [1.968]
50 [1.968]
50 [1.968] 50 [1.968]
32 [1.26]
It is up to the installer to make sure that the enclosure has forced ventilation or ventilation grooves
in order to prevent the inside temperature to exceed the specified ambient temperature.
Between 5º C and +50º C (41º F and 122º F)
Relative humidity between 5% and 95% non condensing.
When using a fan to better ventilate the enclosure, a DC fan must be used since an AC fan may
generate electromagnetic interference resulting in distorted images being displayed by the CRT.
193 [7.6]
257 [10.12]
1.
CNC CONFIGURATION
CNC structure
CNC 8037
SOFT: V01.4X
·27·