CNC 8037 - Installation manual - Fagor Automation

Installation manual
Slot "COMPACT FLASH" - Compartment of the KeyCF (CNC configuration card)
The COMPACT FLASH slot is located on the left side of the CNC. This slot is used for the KeyCF
and for upgrading software versions.
Slot "COMPACT FLASH".
Compartment of the KeyCF (CNC configuration
card).
The KeyCF supplied by Fagor with each CNC has an identification code corresponding to:
The card id (all the cards are different).
The software features that have been purchased for that unit
The id code only needs very little memory space. The rest of memory space of the KeyCF may be
used to store data on machine customizing (user screens, PLC program backup and/or machine
parameters, etc.) as well as user part-programs.
The CNC will recognize the KeyCF as , it can also be accessed from the CNC.
1.
CNC CONFIGURATION
CNC structure
CNC 8037
SOFT: V01.4X
·41·