FARO / EUROPROFI silage trailers - Alois Pöttinger Maschinenfabrik ...

Unloading
A uniform carpet of forage
is a prerequisite for perfect
compaction at the silo. The
automatic unloading system
for proportioning trailers
takes the stress off the driver
and protects the machine.
20
Proportioning trailers (D-type)
Automatic unloading system – for smooth distribution
A pressure sensor in the loading rotor suspension measures the pressure created
when the loading rotor is unloading. If the limit is reached the scraper floor automatically
switches off. When the pressure on the loading rotor falls, the scraper
floor switches back on. Trouble-free unloading of forage. This reduces the driver's
workload.
The cam clutch coupling torque is 1,200 Nm.
Loading rotors – distributed precisely
The trademarks of the oversized loading rotors are the aggressive tines. The
loading rotors enable smooth unloading. The enclosed six-edge design prevents
the forage from winding round them.
The loading rotors can be dismantled.
D-type trailers (proportioning steps)
Normal proportioning
with wide open tailgate
for quickly unloading
large crop quantities.
The central segment
is fixed at the tailgate.
Fine proportioning for
measured unloading at
the horizontal silo. The
central segment of
the tailgate is fixed at
the body.
Universal tailgate
The tailgate is closed hydraulically from inside the
tractor. The tailgate closes automatically. There is no
mechanical locking mechanism.
Additional fine proportioning
setting
The tailgate can be
changed by adjusting
the cylinders on the
bar so that it can only
be opened from the
bottom.
If required: third
unloading rotor for fine
proportioning on the
cross conveyor belt or
particularly precise
dispersal at the horizontal
silo. The loading
rotors can be removed
if required.
Hydraulic cross conveyor
belt (only with
3 rotors) – optional. The
forage is precisely proportioned
on the cross
conveyor belt and can
be unloaded to the left
or to the right.