FARO / EUROPROFI silage trailers - Alois Pöttinger Maschinenfabrik ...

More documents

Recommendations

Info

Loading Automatic system to help loading Users want a high volume of forage with even proportioning. In EUROPROFI silage trailers, the forage must already be compacted in the feed channel. The automatic loading system (optional) ensures that the loading chamber is optimally filled. 36 Load sensing to save power Unloading L-type trailers The constant force progression when loading without torque peaks is a feature of the EUROPROFI. There are two integrated sensors for monitoring the status of loading. They check on the loading status and automatically control the scraper floor accordingly. This protects the transmission chain. Sensor on the front panel Even when loading damp, heavy grass, the crop is not “mashed” by excessive pressure on the loading rotor. Sensor on roof section This sensor measures the load status of the trailer so that the driver does not have to. This significantly improves the filling of the loading chamber. The scraper floor can also be manually controlled. “Trailer full” signal When the trailer is full, the pressure on the tailgate causes the scraper floor to be switched off. This prevents the trailer from being overloaded. Pöttinger silage trailers can be fitted with load-sensing equipment. The required quantity of oil and the pump pressure are measured constantly and adjusted in line with requirements. This saves up to 20 hp (15 kW). Automatic unloading system: Sequence control of tailgate and scraper floor. The wide opening enables easy unloading.
Scraper floor Reliability for long service The scraper floor has four chains. The tempered scraper bars are separated and offset. The loading surface is a pressure-impregnated, durable wooden floor. The boards are tongue-in-groove and are bolted to the frame. Simple maintenance The front scraper floor shafts can be lubricated from the side of the trailer. Scraper floor transmission A heavy duty hydraulic motor provides the transmission. The speed can be freely controlled. The scraper floor can also be driven by a two-stage motor (optional). 37
Page 1 and 2: 97+121.02.0109 Silage Trailers with
Page 3 and 4: Silage trailers are the future. The
Page 5 and 6: Checking durability Pöttinger has
Page 7 and 8: Pages 8 - 9 Construction / body / d
Page 9 and 10: Drawbar systems The silage trailers
Page 11 and 12: The scraper floor transmission is p
Page 13 and 14: Perfect ground hugging Protects t
Page 16 and 17: A precise and consistent cut is the
Page 18 and 19: Loading Automatic system to help lo
Page 20: Unloading A uniform carpet of forag
Page 23 and 24: You have the choice … Pöttinger
Page 25 and 26: fessional use Pages 26 - 27 Constru
Page 27 and 28: Drawbar Systems The silage trailers
Page 29 and 30: The scraper floor transmission is p
Page 31 and 32: Perfect ground hugging Protects
Page 33 and 34: Cost-effective horsepower The activ
Page 35: Knife security A reassuring detail
Page 40 and 41: Chassis Exceptional handling Increa
Page 42 and 43: Exceptionally user-friendly This is
Page 44 and 45: Technical data FARO EUROPROFI 44 Ca
Page 46 and 47: Fittings FARO High-slung pivoting d
Page 48: Alois Pöttinger Maschinenfabrik Gm

FARO / EUROPROFI silage trailers - Alois Pöttinger Maschinenfabrik ...

Create successful ePaper yourself

Delete template?

Save as template?