Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Construction Chemicals<br />
Plastering Mortar<br />
Thick<br />
Fiber reinforced autoclaved aerated concrete<br />
brick interior and exterior facades<br />
SIV is applied as a thick pumice on the block<br />
POLYMER THIN REINFORCED CEMENT-BASED PLASTER<br />
Product Description<br />
With the aim of creating fine plaster was prepared containing polymer additives, cement-based plaster<br />
mortar.<br />
Application Areas<br />
Rough plaster on interior and exterior walls as thin plaster, exposed concrete repair features disorders<br />
Consists of fiber-reinforced polymer.Excellent adhesion and easy to implement.Cracking.Flexible.The<br />
image of gypsum plaster.Can be painted over. Processing time is long. Hand and machine and separate<br />
types to apply. Primer for use on exposed concrete use of Maxi-HOLD Promotion.<br />
MIXING: a bag, with a low speed mixer for 3-4 minutes with 6-7 L of water are mixed. Rest for 5 minutes.<br />
Repeat for 1-2 minutes. mixed material should be used within 2 hours.<br />
APPLICATION: Apply water for Pre-saturate the surface with a trowel. or machine, if desired plaster<br />
surface is smoothened with a wet sponge. Slightly dampening the surface with a steel trowel or polishing<br />
can be done.<br />
İmproved cement with water in hot weather<br />
Technical Specifications<br />
Type: Cement based powder mortar Color: Concrete Gray Density: 1.5 to 1.7 kg / Push<br />
Mixing ratio: 25 kg Maxicoll fine plaster: 6-7 liters of water Application temperature: +5 ° C / +30 ° C to TS<br />
EN 998-1<br />
Application time: Approximately 45-60 minutes (25 ° C)<br />
Consumption (depending on the surface): 1.5 to 1.7 kg/m2 (1mm thickness)<br />
Packaging: 25 kg paper bags<br />
STORAGE: Moisture resistant bag, sealed and be stored properly in dry conditions. Shelf life in original<br />
packaging for at least 6 months, respectively.<br />
WARNING: Cold ( +30 ° C) weather conditions should not be applied. Hazards and safety<br />
precautions: Use protective goggles and gloves when working. The necessary measures for the material<br />
to lose use water rapidly In case of contact, rinse with plenty of water. Do not breathe dust from cement,<br />
Avoid contact with skin and eyes. Do not add any additives not mentioned in the Application Instructions.<br />
Store in a dry medium up to 10. The above values at 23 ° C ± 2 for the enviromental conditions of<br />
temperature and humidity were 50 ± 5%. These values may vary depending on enviromental conditions.<br />
Maxicoll technical support, or for more information, please contact Technical Support.
Change language