maxicoll 2013 catalog

More documents

Recommendations

Info

CONTRIBUTION TO MULTI-PURPOSE MORTAR CONTRIBUTION TO MULTI-PURPOSE MORTAR Product Description Cement-based mortar, plaster, screed to increase the performance of materials such as synthetic rubber based liquid mortar additive. Application Areas Cement-based mortars flexibility, adherence and improves water tightness, repair slurries. Features • Bond strength is increased. • Abrasion resistant.. • Permeability decreases. Flexibility is increased. • Resistance to freeze-thaw cycles • dilute acidic and basic solutions, salt water, and chemical resistant to oils. Technical Specifications Appearance: white liquid Shelf life: 12 months in original sealed packaging Density: 1.03 ± 0.03 g/cm3 pH value of 8 • Application Temperature: (+5 ° C) - (+35 ° C) Mixing ratio: 1/1-1/4 (according to the place and purpose of use) Consumption varies according to the place and purpose of use Application Instructions İmproved and the surface must be solid. The surface must be free of debris that may prevent adhesion. More air than needed to prevent the introduction of Maxicoli Mortar Additive. for different uses Mortar Additive Maxicoll recommended should be mixed with water according to the ratio in a suitable container. The concrete mixer should be placed, on the cement and fillers added. Lump in advance to avoid each other, mixing of cement and fillers are recommended elsewhere. Mortar should be mixed until a homogeneous mixture is obtained. Plaster mortars to use: Cement mixed with sand with a particle size sufficient amounts of the appropriate mixture (cement / sand ratio: 1/4 -1 / 5); Maxicoll Mortar Additive / Water: 1/4 by participating in enough water to the mortar mixture is obtained. Repair mortars to use: The prepared powder mortar (cement / sand ratio: 1/3 -1 / 4); Maxicoll Mortar Additive / Water: 1/2 the rate of repair mortar is obtained by participating in enough water to the mixture. Screeds use: First of all, for the preparation of the mortar to be used as adhesion enhancing layer, dust, mortar (cement / sand ratio: 1/3), Maxicoll Mortar Additive / Water: 1/2 percent should be added to the liquid mixture until the consistency. the thickness of 2 mm to be prepared mixture should be applied to the floor by brush. screed should be applied. for the preparation of the mixture containing Sufficient sand and cement screed (cement / sand ratio: 1/3 -1 / 4), Maxicofl Mortar Additive / Water: 1/3 ratioenough water should be added to the mixture. Expired or shell mortar should be discarded. After the implementation of tools and hands should be washed with plenty of water. High temperatures, low humidity, wind, etc Maxicoll climatic conditions of the mortar must be improved carefully prepared with Mortar Additive. Rapid evaporation can cause shrinkage and surface cracks due. Warnings For more information refer to the Safety Data Sheet. Clean and dry place, between +5 ° C and +35 ° C, so that there must be stored out of direct sunlight. Must be protected from frost. Packaging: 5 Push, Push, plastic drums 10 and 20, Public Works Item No: 04.61314
EPOXY ADHESİVE AND GROUTİNG Product Description Epoxy resin-based, three-component, solvent-free, chemical resistant adhesive and sealant material. Application Areas Where the desired chemical resistance and strength anti-acid porcelain tiles, terracotta, clinker, granite, ceramic and marble floor and wall bonding, food Industry (milk, beer, wine, meat Integrated plants, slaughter houses, cafes and restaurants), textiles, electronics Industry facilities, hospitals, laboratories, and pharmaceutical Industries as well as floor and wall installations of hygiene required for filling the joints. High chemical and mechanical strength is desired to fill the Industrial floor and wall joints, laboratory benches and commercial kitchen work surfaces, ceramic tile, filling the joints, or thermal water containing salt swimming pools and waste water treatment plants to fill the floor and wall joints. Technical Specifications • Excellent adhesion. • Resistant to heavy traffic. • Vertical slip surface applications. • Easy to trowelEasy to trowel. • High chemical and mechanical resistance. • Suitable for 10 mm joint widths. • Resistant to short-term temperature changes. • Freeze thaw resistant. • Stain resistant. • Hygienic for its low water absorption. • Easy to smooth surface gives the possibility. > Cracking, abrasion resistant and long lasting. • Easy to apply with pot life of 130 minutes at 25 ° C. Component A: White viscous liquid Component B: transparent, liquid Component A: white powder Shelf Life (Component A / B / C): unopened, original packaging when stored in 12 months Content of the mixture (Component A / B / C): Epoxy Resin / Hardener / Fill Application Specifications • Application temperature: (+10 ° C) - (+27 ° C) • Pot life: 25 0 C, 120 minutes • Open Time • Grouting Time: 12-48 hours (depending on enviromental temperature) • Touch dry: 7 hours • Walkabillty Duration: 24 hours • Usage Time (Maximum Chemical Resistance): 7 days • Consumption: 3-4 kg/m2 adhesive • Joint filling machinery; see. Epoxy Grout Consumption Table • Start:>2 N/mm2 • Water immersionThenimmersion Then:>2 N/mm2 • Thermal Shock After:>2 N/mm2 • Flexural strength (EN 12808-3):>30 N/mm2 • Compressive Strength (EN 12808-3):>45 N/mm2 • Wear Resistance (EN 12,808-2):
Page 1 and 2: PRODUCTS CATALOG 2013
Page 3: CONTENTS 2 MAXICOLL PRODUCTS 3 EXTR
Page 6 and 7: Construction Chemicals Adhesive WHI
Page 8 and 9: Construction Chemicals Adhesive WHI
Page 10 and 11: Construction Chemicals Adhesive Hei
Page 12 and 13: Construction Chemicals Autoclaved A
Page 14 and 15: HI-MAX READY MULTI PURPOSE ADHESIVE
Page 16 and 17: Construction Chemicals Pool Seramic
Page 18 and 19: Construction Chemicals Grouting WHI
Page 20 and 21: Construction Chemicals Pool Gap Poo
Page 22 and 23: Construction Chemicals Repair Morta
Page 24 and 25: Construction Chemicals Plastering M
Page 26 and 27: Construction Chemicals Plaster Styr
Page 28 and 29: Construction Chemicals Semi Elastic
Page 30 and 31: PRODUCT DESCRIPTION Rubber-bitumen-
Page 32 and 33: Construction Chemicals Heat and Sou
Page 34 and 35: Construction Chemicals A full 24 ho
Page 36 and 37: Construction Chemicals Self Levelin
Page 38 and 39: MAXI-HOLD PROMOTION PRIMER Resin-ba
Page 40 and 41: Surface Leveling Tool to Improve Ad
Page 42 and 43: PREVENT DIRT AND WATER REPELLENT Pr
Page 46 and 47: EPOXY SIM EFFECT MAXICOLL Product D
Page 48: MULTI-PURPOSE EPOXY FLOORING PRODUC
Page 51 and 52: Construction Chemicals Flex Adhesiv
Page 53 and 54: Construction Chemicals Aerated Conc
Page 55 and 56: Construction Chemicals Styrofoam Gl
Page 57 and 58: Construction Chemicals Grouting Cer
Page 59 and 60: Construction Chemicals Repair Morta
Page 61 and 62: Construction Chemicals Plaster Styr
Page 63: Construction Chemicals Leveling Pri
Page 66 and 67: PREVENT DIRT AND WATER REPELLENT Pr
Page 68: Grout Coverage Charts (coating leng

maxicoll 2013 catalog

Create successful ePaper yourself

Delete template?

Save as template?