Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Construction Chemicals<br />
Decorative<br />
Plaster<br />
DECORATIVE PLASTER<br />
Product Description<br />
White cement based, one-component, polymer modified, applied with a trowel, mineral textured<br />
decorative finish cladding.<br />
Application Areas<br />
• Coat decorative coating material for thermal insulation systems,<br />
• Interior and exterior wall plaster is used on.<br />
Features<br />
• Easy to apply, excellent adhesion.<br />
• Decorative and a homogeneous-looking application.<br />
• Thermal insulation systems, applications, wavy appearance can be corrected.<br />
• Water and frost resistant.<br />
• resistant against external influences and protects the structure for many years.<br />
• Water vapor diffusion and allowing the structure to breathe.<br />
• can be applied on exterior paints.<br />
Technical Specifications<br />
Appearance: White, Ivory and Beige colored granular<br />
Powder Density: 1.55 kg / lt.<br />
Water Mixing Ratio: 6-6,5 lt. water / 25 kg. dust<br />
Resting time: 2-3 minutes<br />
Pot Life Approx: 1.5-2 hours<br />
Application Temperature: +5 ° C to 35 ° C<br />
Application thickness: about 2 mm.<br />
Full Drying time: 1-2 days<br />
Temperature Resistance: -20 ° C / +70 ° C<br />
Consumption: 3 kg/m2 (may vary depending on the application surface.)<br />
Application Instructions<br />
25 Kg bag, with 6 to 6.5 kg of water is mixed with a low speed mixer. Pre-saturated surface water applied<br />
with a trowel. Aerated concrete, Ytong absorption of water absorbency high walls, such as pre-Maxicer<br />
primer.Temperatures below +5 ° C and +35 ° C. Avoid application. Apply possible without a break,<br />
interruption if necessary by dividing the surface areas of about 20 m2 Apply separately. Plastic trowel<br />
application at least 10 min..Frostbe allowed to film on the inside through the plaster, or who are at risk of<br />
freezing within 24 hours of direct sun and wind Avoid application in public areas. After the application until<br />
the cement plug (about 1 week) Please note that there is no snow or severe cold. Do not use the expired<br />
mortar absolutely dust and water addition. Product should not be applied on a horizontal surface in the<br />
rain.<br />
Packaging: 25 kg. 'Kraft bags<br />
Shelf life in unopened package ¡humidity environments and can be stored for 6 months on a pallet with<br />
10-fold sequence.<br />
Warning<br />
Handling and storage of food products during the occurrence of a cement-based, skin, eyes and mouth<br />
should be avoided. Seek medical attention if swallowed by accident. Contact with skin, rinse immediately<br />
with plenty of water. Maxicer technical support, or for more information, please contact Technical Support.
Change language