maxicoll 2013 catalog

More documents

Recommendations

Info

Surface Leveling Tool to Improve Adherence ACRYLIC-BASED ABSORBENT SURFACES FITNESS-ENHANCING LINING PRODUCT DESCRIPTION Gas concrete, plaster, cement-lime plaster mixed surfaces, such as high porosity of the coating material that prevents absorption of water of hydration primer. Application Areas Plaster on the walls, such as concrete and Ytong, self-leveling concrete surface before straw plaster, concrete, drywall, wallpaper, ceramic coating on the walls priorthe screed under the carpet is used to prevent dusting. Features Acrylic is indoor use only. Autoclaved aerated concrete, handle, cement-lime plaster mixed, lace, preventing water absorption within the material to be applied on materials such as gypsum board, prevents cracking of these materials. Prevents the ingress of water was placed on the structure of the material. Transparent color does not apply. Application Surface preparation: Application surface should be dust-free, dry, and solid. , if materials such as paraffin oilis On the surfaceit will decrease the adherence those should be cleaned. Mixing: Stir thoroughly prior to use material to prevent possible crashes. There is no need for the addition of water material watertomaterial . Displacement: The material is applied in a single layer on application surface with a brush or roller. Aerated concrete surfaces, such as tests conducted with high absorbancyevena single flooris found sufficient . If water sprinkled on the surface drops remains at the material after drying. Technical Specifications Type Colour: White is transparent when placed Unit weight: 1,00 kg / Push Application Temperature: +5 ° C / +30 ° C PACKAGING: 20 -10 kg plastic buckets. STORAGE: 12 months in closed and cool. Protect from frost WARNING: Cold ( +30 ° C) weather conditions should not be applied. Use protective goggles and gloves when working. In case of contact with skin, rinse immediately with plenty of water. In case of contact with eyes, consult. doctor immediately for assistance or more information please call Technical Support MAXICOLL
CERAMIC SURFACE PROTECTIVE Product Description Excellent penetration ability, ready to use solvent-free surface protective material. Application Areas Water and oil repellent properties of coating materials and joints due to contamination and make them resistant to outdoor weather conditions. Prior to grouting, clinker, cotto, ceramic, granite, brick, coating materials are applied on for the protection and provides the cleaning jobs to facilitate Technical Specifications • Surface water and oil repellent makes. • form a film layer on the surface. View Shelf Life Application Temperature Drying Time Consumption • prevent the surface to breathe. After you have installed will be transparent milky white. 12 months in unopened packaging in dry conditions (+5 ° C) - (+35 ° C) 4-5 hours Average 1 It / 20-100 m2 (depends on the porosity of the surface.) Application Instructions Maxicoll ceramic surface must be completely dry and cleaned with the screensaver. Gloves should be worn during application. Maxicoll ceramic surface protector, diluted with water, place on a flat bristle brush or a sponge and an equal amount of each agent. Product poured directly to the surface. After application, wait for 1-2 minutes excess material must be removed with a cloth. Wait for 4-5 hours between coats. Vertical brick surfaces can be applied by spraying. New application to the application surface should be repeated 3-4 times a year, depending on the state of coating. Each re-application, the surface should be cleaned with appropriate Maxicoll products. Rinsed with plenty of water to clean the surface, After the surface is completely dry and then apply Maxicoll surface protector. before grouting applications, the product should be careful not to get into joint spaces. After the application, the application tools can be cleaned with water. Warnings Avoid contact with skin and eyes. Ready for use. The surface should be dry. Store in a cool, dry place.Must be protected from frost. Packing: 1 and 0.5 lt. squeeze bottle JOINT PROTECTOR Product Description JOINT PROTECTIVE synthetic resin ready for use Excellent penetration ability, material. Application Areas Interior and exterior, kitchen counters, floors and counter tops joint filler and oil repellent make the color of the joints resistant to dirt and outdoor weather conditions. After application of grouting is applied on the grout joints Features • Surface water and oil repellent makes. • form a film layer on the surface. • prevent the surface to breathe. Technical Specifications Appearance: milky white becomes transparent after installing. Shelf life in original sealed packaging Application Temperature: (+5 ° C) - (+35 ° C) Drying time: 3-4 hours Consumption: Average 20ml / m2 (Depends on the porosity of the surface.) Application Instructions Should be cleaned and completely dried with Maxicoil JOINT PROTECTOR. Gloves should be worn during application. Maxicoll JOINT PROTECTOR, diluted with water, place on a flat bristle brush or a sponge and an equal amount of each agent. Product poured directly to the surface. With an interval of 1 hour to 48 hours after jointing process is twofold application. Application to the application surface should be repeated 4-5 times a year depending on the state of wear and tear. Each re-application, the surface should be cleaned Maxicoll what is the appropriate products. Rinsed with plenty of water for the surface being cleaned, the surfaces is completely dry and then apply JOINT PROTECTOR. After the application, the application tools can be cleaned with water. Warnings Avoid contact with skin and eyes. Ready for use. The surface should be dry. Store in a cool, dry place.Must be protected from frost. Packing: 1 and 0.5 lt. squeeze bottle
Page 1 and 2: PRODUCTS CATALOG 2013
Page 3: CONTENTS 2 MAXICOLL PRODUCTS 3 EXTR
Page 6 and 7: Construction Chemicals Adhesive WHI
Page 8 and 9: Construction Chemicals Adhesive WHI
Page 10 and 11: Construction Chemicals Adhesive Hei
Page 12 and 13: Construction Chemicals Autoclaved A
Page 14 and 15: HI-MAX READY MULTI PURPOSE ADHESIVE
Page 16 and 17: Construction Chemicals Pool Seramic
Page 18 and 19: Construction Chemicals Grouting WHI
Page 20 and 21: Construction Chemicals Pool Gap Poo
Page 22 and 23: Construction Chemicals Repair Morta
Page 24 and 25: Construction Chemicals Plastering M
Page 26 and 27: Construction Chemicals Plaster Styr
Page 28 and 29: Construction Chemicals Semi Elastic
Page 30 and 31: PRODUCT DESCRIPTION Rubber-bitumen-
Page 32 and 33: Construction Chemicals Heat and Sou
Page 34 and 35: Construction Chemicals A full 24 ho
Page 36 and 37: Construction Chemicals Self Levelin
Page 38 and 39: MAXI-HOLD PROMOTION PRIMER Resin-ba
Page 42 and 43: PREVENT DIRT AND WATER REPELLENT Pr
Page 44 and 45: CONTRIBUTION TO MULTI-PURPOSE MORTA
Page 46 and 47: EPOXY SIM EFFECT MAXICOLL Product D
Page 48: MULTI-PURPOSE EPOXY FLOORING PRODUC
Page 51 and 52: Construction Chemicals Flex Adhesiv
Page 53 and 54: Construction Chemicals Aerated Conc
Page 55 and 56: Construction Chemicals Styrofoam Gl
Page 57 and 58: Construction Chemicals Grouting Cer
Page 59 and 60: Construction Chemicals Repair Morta
Page 61 and 62: Construction Chemicals Plaster Styr
Page 63: Construction Chemicals Leveling Pri
Page 66 and 67: PREVENT DIRT AND WATER REPELLENT Pr
Page 68: Grout Coverage Charts (coating leng

maxicoll 2013 catalog

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?