Comfort 820 - Marantec
Comfort 820 - Marantec
Comfort 820 - Marantec
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6. Mounting<br />
6.2.2 Operator with swivel support<br />
6.2.2/ 1<br />
q<br />
E<br />
Attention!<br />
The support must be aligned to the<br />
door so that the spur gear will grap into<br />
the toothed rack in every door position<br />
H<br />
80<br />
C<br />
360<br />
≥ 380<br />
F<br />
G<br />
D<br />
C Wall<br />
D Door<br />
E Screw area for the toothed rack<br />
F Empty conduit for supply line / control cable<br />
G Swivel support<br />
H Foundation<br />
q Clear driveway<br />
• Align the swivel support flush with the door.<br />
• Measure the distance from the screw area<br />
of the toothed rack (E) to the operator.<br />
Observe measurement X.<br />
Special 431 + Special 433: X = 104<br />
Special 432 + Special 434: X = 104<br />
Special 441 + Special 443 X = 104<br />
Special 471: not possible<br />
• Drill the holes according to the indicated drilling<br />
scheme.<br />
17<br />
50<br />
90<br />
108<br />
X<br />
6.2.2 / 2<br />
10 x 70<br />
• Mount the swivel support.<br />
6.2.2 / 3<br />
Attention!<br />
To maintain the swivel function,<br />
the support angel must be movable<br />
after fixing.<br />
• Screw the support angle to the operator.<br />
14 Installation and operating instructions <strong>Comfort</strong> <strong>820</strong> GB (#70663)<br />
M10
Change language