Comfort 820 - Marantec
Comfort 820 - Marantec
Comfort 820 - Marantec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
9. Programming<br />
9.1 General notes on programming<br />
The programming is carried out with the buttons +, -,<br />
and P.<br />
If none of the buttons is actuated within 120 sec. in<br />
programming mode, the control unit changes back to<br />
the operating mode.<br />
An error message is displayed accordingly.<br />
9.1.1 Programming levels<br />
The programming of the operator is divided in two<br />
areas:<br />
1. Programming of the basic level:<br />
The basic functions of the operator are programmed<br />
in this level. This programming process is carried out<br />
consecutively and it is compulsory.<br />
To come to the programming of the basic level,<br />
button P must be pressed longer than 2 sec. but less<br />
than 10 sec..<br />
LED 2 is flashing.<br />
2. Programming of the extended<br />
operator functions:<br />
The programming of the extended operator functions<br />
may only be carried out by specialist personnel.<br />
As soon as the button P is pressed longer than 10 sec.,<br />
the control unit changes to the programming of the<br />
extended operator functions.<br />
LED 2 is then flashing quickly.<br />
Advice:<br />
In the extended operator functions<br />
important factory settings can be<br />
changed.<br />
38 Installation and operating instructions <strong>Comfort</strong> <strong>820</strong> GB (#70663)