Comfort 820 - Marantec
Comfort 820 - Marantec
Comfort 820 - Marantec
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
6. Mounting<br />
6.4.1 / 4<br />
• Join the toothed rack segments until the required<br />
measurement (q = door length - approx. 160 mm)<br />
is reached.<br />
In case the segments are longer than the necessary<br />
length:<br />
• Cut the projecting part.<br />
6.4.1 / 5<br />
q<br />
• Slide the toothed rack segments into the toothed<br />
rack segment profile.<br />
6.4.1 / 6<br />
• Insert the end position dampers (A) and the clamping<br />
device (B) into the toothed rack profile.<br />
6.4.1 / 7<br />
B A<br />
Attention!<br />
The toothed rack segments must have<br />
a slight tension in the completely<br />
mounted toothed rack.<br />
Otherwise malfunction and damages to<br />
the toothed rack could result.<br />
To mount the second end position damper:<br />
• Press the clamping device (B) into the profile until the<br />
toothed rack segments (C) are under slight tension.<br />
• Mark the two drill points of the clamping device on<br />
the profile.<br />
18 Installation and operating instructions <strong>Comfort</strong> <strong>820</strong> GB (#70663)<br />
B<br />
C