INTELLINET Gigabit SATA NAS - PCDeacitec

More documents

Recommendations

Info

NOTE: Never turn off your device during the firmware upgrade procedure, as this may damage it. If for any reasons (e.g., power supply failure during the firmware upgrade) the procedure fails, you may not be able to operate your device anymore. 4.2.5.4 Save Configuration For backup and before every firmware upgrade, you can use this function to save the current configuration. Click “Save” and save the “config.tar” file on your computer. 4.2.5.5 Restore Configuration To quickly restore previous settings or set up multiple units, you can save the configuration and then use this function to upload a previous backup. Browse for the “config.tar” file on your computer and click “Restore” to restore the previous settings. 32 web ConfIGUratIon
4.2.5.6 factory reset Clicking “Factory Reset” will restore all settings to their default configuration. First, however, save your current configuration in case you want to restore it again later. NOTE: When “Factory Reset” is clicked, all users, groups and other configurations will be lost. The files inside the shared folders won’t be erased, but only the administrator will have access to them via an SMB connection, unless the same share name is set up again and access is granted for new users. To completely erase the files inside the shares, use the Share Management menu to remove the shares before the reset, or use the administrator account after the reset, log in via SMB and delete the files. 4.2.6 log file This menu includes all the log files of your Gigabit SATA NAS. You can find logs for the SAMBA, FTP and DHCP servers, as well as system and administration logs. NOTE: To delete old log files, click “Clean.” web ConfIGUratIon 33
Page 1 and 2: GiGabit Sata NaS uSer maNual Models
Page 3 and 4: table of coNteNtS section page sect
Page 5 and 6: USB device port — This USB type-A
Page 7 and 8: The jumper is placed on J4 at the f
Page 9 and 10: 2 QuicK iNStallatioN 2.1 Connection
Page 11 and 12: 3 SYStem SetuP / loGGiNG iN To conf
Page 13 and 14: 9. The setup wizard will remind you
Page 15 and 16: 3. Select “Bonjour” and browse
Page 17 and 18: • Mac users, follow the setup wiz
Page 19 and 20: 4.2 control Panel 4.2.1 users and G
Page 21 and 22: set a limit for the disk space. For
Page 23 and 24: 4.2.3.1 laN Settings In this sectio
Page 25 and 26: 4.2.4 Network Service In this menu,
Page 27 and 28: 4.2.5 maintenance In this menu, you
Page 29 and 30: hard drives fails, it can be replac
Page 31: 5. When the procedure is complete,
Page 35 and 36: 5 NetworK StoraGe To access the dat
Page 37 and 38: 2. Follow the setup wizard on-scree
Page 39 and 40: 5.2 file access on a mac 5.2.1 Smb
Page 41 and 42: 6 additioNal featureS 6.1 uPnP The
Page 43 and 44: 3. Start iTunes and the Gigabit SAT
Page 45 and 46: USB drive. When connected directly
Page 47 and 48: 4. When the Local or Network Printe
Page 49 and 50: 2. When the Printer Browser screen
Page 51 and 52: 6.6 bittorrent Used in conjunction
Page 53 and 54: 7 GloSSarY bittorrent — This is a
Page 55 and 56: Q: Which file system is recommended
Page 57 and 58: • Disk space usage (quota) manage
Page 59 and 60: SafetY & comPliaNce StatemeNtS fcc
Page 61: INTellINeT NeTWoRK solUTIoNs offer

INTELLINET Gigabit SATA NAS - PCDeacitec

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?